Novatron Heavy Duty Bracket (Black)
Heavy duty bracket for mounting equipment (with proper adapter) to a standard light stand. The bracket can tilt and receive an umbrella. The 4040 bracket is included with M300, M500 monolights and the 2103-FC flash head.
Do you want to make the spot of light from our 4001-A1 Adjustable Snoot even tighter? The 4001-A1 is the solution. Our 4001-A1 Honeycomb Grid is a simple attachment for directing a narrower, more concentrated beam of light. The light may then have less spill onto other places on your set.
The 4001-A1 Honeycomb Grid attachment slips onto the front end of our 4001-A1 snoot.
Modeling Lamp 250 Watt Halogen Bulbs for CL04 Units
Modeling Lamp 500 Watt Halogen Bulbs for CL04 Unit
For decades professionals have used our One Stop Switching Flash Head for less illumination from their main light source.This could be for a fill light, a hair light accent, to illuminate a background,or where ever creative use that comes to mind.The 2110C,at full power,shares an equal portion of the light,from the other head plugged into the same pack.It can be switched off,too.The modeling light switch adjusts independently from the flash.
The 1000 watt/second flash tube is color balanced to 5500 degrees Kelvin. The 100 watt Tungsram modeling lamp is very affordable. A 25′ heavy duty cable is a manageable length.
Flash Ratio/Modeling Switches- Full
Modeling Lamp- 4101-100 watt Tungsram
Cable Length – 25 Feet
This Two Stop Switching Flash Head has been a staple of Novatron professionals for decades.Use it for hair light accents or illuminate a background.Get creative about lighting anything at two stops less output.The 2120C,at full power can share an equal portion of the light,from the other heads plugged into the same pack,too,or it can be switched off.The modeling light adjusts, independently.
The 1000 watt/second flash tube is color balanced to an excellent 5500 degrees Kelvin.The 100 watt Tungsram modeling lamp is very affordable.A 25’heavy duty cable is a terrific,manageable length for just about all needs.
IN THE BOX:
1000 w/s UV coated built-in Flashtube
100 W screw-in Tungsten Modeling Light
25′ head cable
1 Year Manufacturer’s Warranty
Maximum Watt/Seconds -1000*
User Replaceable Flashtube -No **
Changeable Reflector -No
Circuit Protection -None
Cable Length -25′
Modeling Light Wattage -100W, 120V
Modeling Light On/Off Switch – Yes, 2-way switching
Protective Glass Dome – No
Fan Cooled -No
Dimensions -5″ x 7″ with built-on reflector
Weight – 2.2 lbs (1 kg)
Note:Damage will result if you use this head, by itself with the D1500 Power Supply @ full power. This action would also void the warranty.
Novatron flash heads demonstrate the most efficient flash emission available in the industry. Each head is subjected to 100% quality checks at each step of fabrication and assembly. The fully assembled heads are, again, 100% tested under load for a minimum of 100 firings as a final inspection. Novatron flash tubes are color corrected to a color temperature of 5500 degree Kelvin (daylight). Novatron flash heads come in two categories, un-switched and switched. To avoid damage, switched heads must not be used in the stop-down mode without at least one other head set to full power. Damage of this nature voids the warranty. All standard line heads including 2140-C, 2120-C, 2110-C, 2105-C, and 2100-C, come factory equipped with a 6-1/2″ fixed high efficiency parabolic reflector and factory replaceable flash tube. All Novatron standard line flash heads are configured with our 4045, 5/8″ adapting mounting brackets. The brackets used in heavy duty applications such as large soft boxes may benefit by the use of the optional 4049 locking heavy duty handle kit which replaces the tilt knob with a 3-1/2″ handle.
The 2140-C is a 3-way switching flash head that contains the controls to independently ratio the flash and modeling lamp at full, -1 stop, or -2 stops. This flash head cannot be switched fully off. It’s equipped with a 100 watt modeling lamp, a 25-foot power cord, and a 4045 mounting bracket.
Maximum Watt/Seconds 1000 w/s *
User Replaceable Flashtube No **
Changeable Reflector No
Circuit Protection No
Cable Length 25′
Modeling Light Wattage 100W, 120V
Modeling Light On/Off Switch Yes
Protective Glass Dome No
Fan Cooled No
Dimensions 5 x 7″ (12.7 x 17.8 cm) with built-on reflector
Weight 2.2 lbs (1 kg)