Welcome to OmegaBrandess.  Want to place an order? Give us a call: (410) 374-3250. Free shipping on most orders over $50

Shopping Cart

Showing 1–40 of 405 results


.8 pitch 1″ diameter gear


The Zacuto 0.8 Pitch 1″ Diameter Gear is used with the Z-Focus follow focus unit. This standard-size gear allows for slow and measured lens rotation, resulting in extremely accurate focusing.


1 inch Male/Female Rod (1)


1″ black male/female rod extension. Female on one end and male on the other. 1 rod extension only. These rods are lightweight; 15mm diameter with 60mm spacing and black anodizing. They are made out of 6061 aluminum and the threads are ½ 13.


1/4 20″ Lens Support


The 1/4 20″ Lens Support uses a 1/4 20″ screw to screw directly into a variety of lenses for more support. This lens support clamps to the rods from underneath so it can quickly be taken off the rods. The middle rod that attaches to the lens has vertical adjustment, if needed (please select the rod size below). Only thumb screw tightening is necessary, no tools required. This lens support can be used with a variety of rod sizes. Please select the rods that are being used below for the q-mount.

1/4 20″ Lens Support Includes:
Rod (please select the size of rod needed)
1/2″ to 1/4 20″ adapter
Q-Mount Lightweight (if a different size Q-Mount is needed, please call)

16″ strand of zipgear with no metal housing unit


A 13.5″ (size can vary up to .45″) strand of zip gear with no metal housing unit.

All zipgears are a .8 pitch.




Zacuto’s Z-Focus 3D Dry Erase Operator’s Marking Disc is a new 3D marking disc that allows the camera operator to see focus marks while operating the camera. This disc is magnetic and dry erase. This disc fits on all Zacuto follow focuses.




4.5″ Rod. Male on one end, Female on the other. 1 rod only.

Our rods are all lightweight; 15mm diameter with 60mm spacing and clear anodizing. They are made out of 6061 aluminum and the threads are1/2″ 13.

Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.


Anti-Fog Protective Covers – Pack of 3


The anti-fog protective covers offer anti-fog and protection for your Z-Finder Pro and V2 lens. These covers are expendable* as customers may lose, scratch or damage these covers over time. They are meant to give you anti-fog and to help protect the actual lens on the Z-Finder. If your Z-Finder Pro and V2 did not ship with the anti-fog protective covers then you will need the Anti-Fog Protective Cover Upgrade Kit (pack of 3 with lens cap and eyecup) in order for them to work as the lens cap is slightly different than the one you have now.


Anti-Fog Protective Covers Upgrade Kit w/ 3 lenscaps & eyecup


The anti-fog protective cover upgrade kit includes a pack of 3 anti-fog protective covers, a lens cap, and an eyecup. The anti-fog protective covers offer anti-fog and protection for your Z-Finder Pro and V2 lens. These covers are expendable* as customers may lose, scratch or damage these covers over time. If your Z-Finder Pro and V2 did not ship with the anti-fog protective covers then you will need this upgrade kit in order for them to work as the lens cap is slightly different than the one you have now.

C300 Studio Baseplate with 12″ rods


The C300 Studio Baseplate is made specifically for the EOS C300 camera. It is exceptionally flat which helps keep the center of gravity low. This baseplate features a pair of 15mm rods that are 12 long running through the length of the baseplate. You can quickly reposition the rods for various lens lengths by loosening the 2 levers, one on each side of the baseplate.

On each side of the baseplate there is also a set of 15mm lightweight holes. The side holes take 15mm female rods that are locked via an Allen screw. This gives users a virtually unlimited amount of mounting options. With these side holes, you have the option of turning the baseplate into a cage configuration.

Another option is to mount a Zwiss Plate with professional batteries off of the side of the baseplate when shooting on a tripod for better balance. When not using a cage configuration, the side holes can be used for an EVF, Zacuto articulating arms, rods and more. The baseplate also has standard ¼ 20 and 3/8 16 holes on the bottom for mounting the rig onto a tripod.

The C300 Studio Baseplate attaches to the camera with 3/8 16 and ¼ 20 screws*. This Baseplate is perfect for a rig like the C300 Stinger or an advanced tripod rig with rods coming off of the back end for external power, etc.



Quick View



The Cross Fire is a unique kit as it is the Single Action kit and Striker kit combined. It comes with all block rods. The Cross Fire uses the expandable DSLR baseplate so this kit can easily be upgraded from a simple point of contact kit like the Striker Kit to a full shoulder mounted system like the Fast Draw. This kit works on any DSLR camera with or without battery grips as it is infinitely adjustable in height. The baseplate attaches to your tripod plate using the standard tripod plate screws, (2) ¼ 20 and (1) 3/8 16. Your camera can also be quickly released from the rig by turning the red knob then pulling up on your camera. The camera quick release plate stays mounted to your camera so you can quickly switch between using the camera as part of a rig or on its own. You can easily add the optional Z-Finder Pro, DSLR optical viewfinder, by attaching the Z-Finder Mounting Frame (included with the Z-Finder Pro) to the camera quick release plate using two thumb screws.




The Double Barrel kickstand is recommended for the DSLR Double Barrel Kit. It gives the rig a more stable footing when rested on the ground or flat surface, especially when the camera is loaded with many accessories such as follow focuses and matte boxes. It is all black.



Quick View



Your Zacuto DSLR Base Plate is a highly configurable base plate which is adjustable to accommodate tall and short body cameras and cameras with battery grips. It also has mounting points to attach just about anything. It comes with 2 black 3.5″ rods.

The DSLR Base Plate can accommodate 15mm rods on all 4 sides. On the front are 2 levels for rods. The top is for mounting follow focuses, matte boxes, zoom/focus motors and lens support if space allows. The bottom rods are primarily used for lens support and single or double hand grips. These rods can be locked via allen screw so as to not come loose if using only one side for a single hand grip. The rear rod holes are for rod extensions to support battery power, wireless plates, monitors and numerous other accessories that you may need when in a tripod configuration. The rod holes on the left and right sides are for mounting the gunstock and the offset shoulder pad and counterweight for hand held use. Also mounted on these side rods can be a top handle, monitor arms and the cage which would use both sides at the same time.

On the bottom of the DSLR Base plate are your standard ¼ 20 and 3/8 16 mounting holes for tripods, mono pods, steadicams, etc. The top plate is a quick release plate that with a twist of the red knob lifts straight up and off separating your DSLR with the Z-finder attached, from the rest of your rig. The red knob also gives you left/right movement to adjust the lens position. On the front of the base plate between the rods are 2 allen screws that are used to adjust the top plate vertically. The vertical adjustment is to adjust for different camera body sizes and maintain the proper lens height.



Quick View



The DSLR Handle is a sturdy versatile handle that mounts onto any 15mm rod system using our Z-mount Zwivel. It is the perfect solution for low mode shooting, lifting your rig on and off your shoulder, as well as a quick and easy way to carry your rig. The handle can swivel and slide so you can position it at the rigs center of gravity for perfect balance. You can also mount additional accessories onto the handle rod by using Z-mounts that will enable you to attach anything from a Zamerican arm, additional 15mm rods, lights and mics. The DSLR Handle is quick releasable from the rig by the twist of a lever. This is the perfect handle for all DSLR rig owners. The DSLR Handle is all black.


Enforcer DSLR Gorilla Rig


Enforcer DSLR Gorilla Rig

The Enforcer is the first of its kind, a foldable DSLR run’n’gun rig. It’s small enough to fit in your back pocket but when unfolded, it’s an extremely stable DSLR camera support. .

The Enforcer includes our Gorilla Plate V2 as the platform for your camera. You can attach your Zacuto Z-Finder Mounting Frame to this Gorilla Plate V2. Attach your camera to the plate with the single ¼ 20 screw and quick release on and off the Enforcer with the red quick release ratcheting lever. The Gorilla Plate can be attached at two different points. Keep the Enforcer in a vertical position for use with a Zacuto Z-Finder. This will give you the correct distance from your eye to the Z-Finder eyecup. Extend the Enforcer via the red push lever to place the camera further away for use without a Z-Finder. This gives you a bit more distance to focus on the camera LCD.

Built into the Enforcer is a gunstock with a comfortable rubber pad. Adjust the angle and/or position of the gunstock with the two Allen screws to conform to your body size and shape.

The Enforcer folds up by first quick releasing your camera off the rig. Then push the red push lever to snap the camera support arm down. Push down on the silver circular cap to flip the gunstock away. Reverse to quickly get the Enforcer ready to shoot!


EVF Flip-Up

Quick View

EVF Flip-Up


The Zacuto Electronic Viewfinder (EVF) is a 3.2 high resolution monitor designed to be used in conjunction with any Z-Finder model. The EVF is compatible with all cameras that have an HDMI output, including most DSLRs, the Panasonic AF-100, Sony F3, Canon C100/300/500, RED ONE, RED Scarlet, RED Epic and many, many more. The EVF is compatible with the Blackmagic Camera (and other SDI only cameras) with use of a converter like the Blackmagic HD-SDI to HDMI mini converter. The EVF allows you to operate with your camera “in-line” with your rod system and an offset viewfinder in front of your eye. We believe this traditional film camera and ENG camera style of shooting is the most stable and comfortable. Now we can work this way with any camera. The EVF enhances the stability of any set up, gives you better resolution and focus ability, allows you to get your eye where it most comfortably needs to be, enables low mode shooting, and shortens a shoulder mounted camera package. With an external viewfinder, you’re no longer trapped behind the back of your camera. You can have your camera on a dolly or crane or in a car or anywhere and have the EVF in your hand.

The EVF Flip has a Z-Finder frame built into the unit that can be flipped open to 180 degrees. If a producer/client/director etc. wants to see into the viewfinder, you can flip it open instead of having to adjust so they can get their eye to the loupe. You can also pop off the Z-Finder and use the EVF as a monitor similar to the EVF Snap. The EVF Flip is compatible with any Z-finder.

New firmware upgrades and EVF tech support can be found here.

EVF Flip Includes:
3.2″ Monitor with flip-up function, HDMI loop through and USB port for firmware updates
18 Standard to Mini HDMI Cable
HDMI Right Angle Adapter
Z-Finder Sun Mask
Rechargeable Battery
Battery Charger
Hotshoe EVF Mount
1/4 20″ Mounting Thread
International power adapters
EVF Dust Cover
All EVF’s also include a lens cloth and protection case!

False Color
Pixel to Pixel (Zoom)
Image Flip
Exposure (Zebras)
Focus Assist (Peaking in red and white)
Blue Only
Frame Line
Frame Store
Camera presets for scaling and color (Manual settings also available)
Brightness & amp; Contrast Adjustments
Audio Meter Indicator
Battery Level Indicator
USB Firmware Updatable
Assignable Function Buttons (3)
Live Menu Preview
HDMI Standard Ports (2)

Unit weight: 6.1oz
Weight including battery and Z-finder Pro: 17.5oz

Size: 3.2″ TFT LCD IPS LED
Resolution: 800×480
Color: 16M
Viewing Angle: H: 170° V: 170°
View Area: 70.6mm (H) x 42.76mm (V)

Battery: 7.2v Canon LP-E6 or Equivalent
External: 12v Power Adapter Optional

Video Input/Output:
HDMI: 480i/480p/576p/720p/1080i/1080p24 25 30

Operating Temperature:
-4F to +158F / -20C to +70C

Storage Temperature:
-22F to +176F / -30C to +80C

Power Consumption:
2.5w (5.20 Hours w/ 1800mAH Battery)

A Z-finder is a magnifier and as such, do not allow sunlight to enter the Z-Finder, for even a moment, while it is attached to the EVF. The light can be magnified by the lens and potentially cause damage to the EVF screen. Always use the included Sun Mask and immediately put lens cap over lens when not in use.

This item has a limited 1 year warranty




The EVF Gorilla Plate Bracket is used to mount the EVF onto any of the Zacuto Gorilla Kits that use a Gorilla Plate. It can also be used to mount the EVF onto the DSLR Baseplate. The EVF Gorilla Plate Bracket includes a “sling” bracket which mounts to the Gorilla Plate or DSLR Baseplate using the two allen screws that also attach the red thumb screw block to the plates. (If you are familiar with mounting the Z-Finder Frame on the Gorilla Plate or DSLR Baseplate, the sling bracket is mounted the same way). At the end of the sling bracket is a Z-Mount Zwivel which allows you to attach the EVF Pan and Tilt Mount (included). The Z-Mount Zwivel gives you the ability to position the EVF in a few different ways. Attached to the EVF Pan and Tilt Mount is the ZicroMini. The ZicroMini then attaches to the bottom of the EVF with its 1/4″ 20 screw. This allows you to quickly release your EVF from the mount with the flip of a lever.



Quick View



The EVF Rod Mount attaches your Zacuto EVF to any 15mm rod. This is perfect if you want to connect your EVF Mount to another manufacturer’s rig or to a Zacuto Universal Baseplate when using a video camera such as the AF-100, Sony F3, or FS100. The combination of our Z-mount Zwivel 360 degree connector at the corner and our tilt and pan mount at the top give you unlimited options for placing your EVF. The Zicro Mini allows you to quickly release your EVF from the EVF Rod mount with a flip of the lever. The horizontal and vertical rod ends are threaded female so rod extensions can be used for both distance and height. This truly is a versatile mount enabling the user to place their EVF exactly where it needs to be.