Welcome to OmegaBrandess.  Want to place an order? Give us a call: (410) 374-3250. Free shipping on most orders over $50

Shopping Cart

Showing all 28 results

Sale

(160-PC) “Wein TIP”-TO-PC Cord Replacement

$16.00$14.95

This Wein 160PC is a “Wein Tip” to PC adapter cord that allows use of older Wein transmitters that don’t sport a locking foot.

Sale

(FFA) Replacement Foot/Slave for Vivitar

$63.00$59.95

(FFA) REPLACEMENT FOOT/SLAVE FOR VIVITAR150'-range hot shoe slave with a plus: can be used to permanently repair broken flash foot on any Vivitar 283 or 285 flash unit. Features household-style sync terminal (automatically overrides slave), 1/4″-20 threaded socket, for tripod/lightstand mounting and hardware necessary to make Vivitar repairs. No hard-wiring necessary, installation requires only a #0 screwdriver.These batteryless, pulse light slaves are the handiest available. Simply slide them onto flash hot shoes, and that's it. Or, attach PC cord (not supplied) from flash to slave's PC terminal. “Surround Sync” design ensures omnidirectional performance. Slaves are cast in plastic for incredible durability and integrated with a precision, extruded aluminum housing for “bulletproof” design.

Sale

(HS) HotShoe Slave / Indoor Range 150′

$45.00$39.95

Attach directly to foot of any shoe-mount flash for direct connection or connect a standard PC cord to the side mounted PC terminal. Features a standard foot on the bottom and 1/4-20″ standard tripod thread. Key Features Features built-in ambient light filter for outdoor use. Constructed of aircraft aluminum and solid epoxy; virtually indestructible. Integral 1/4″-20 threaded socket for tripod, monopod or light stand mounting. PC terminal for use with non-shoe flash units.

Sale

(L8) MICRO SLAVE (INDOOR RANGE-150′)

$34.00$29.95

(L8) MICRO SLAVE (INDOOR RANGE-150′)

Wein L8 Features

  • The original battery-free photo slave
  • Range up to 150 feet.
  • Super-compact; smaller than a 35mm film cartridge
  • Standard “H”-prong connector
Sale

(PC-H) PC (FEMALE) TO “H”-PRONG ADAPTER

$21.00$14.95

(PC-H) PC (FEMALE) TO “H”-PRONG ADAPTER A convenient converter that has a molded PC (female) plug and a molded standard “H”-prong female socket connected by a 9″ cord.

(PL) PHOTO-LOK TAPE MOUNTING SYSTEM

$27.00$27.45

(PL) PHOTO-LOK TAPE MOUNTING SYSTEMA 36″ roll of incredibly strong and versatile, single part locking tape that works like Velcro but is several times stronger. Will not wear out and locks itself. It is waterproof and has a super-strong pressure sensitive (permanent) adhesive backing. Will safely hold 10 lbs. per square inch

Sale

(PN-XL) HIGH PERFORMANCE “PEANUT” PC

$45.00$34.95

(PN-XL) HIGH PERFORMANCE “PEANUT” SLAVE PC

Enhanced
version of the original “Peanut” slave. Standard PC sync connector
plugs directly into Vivitar 283/285 or connects to any other flash via
PC cord.

Range up to 300′ (91m).

Ambient light-filtered for outdoor use.

Sale

(SSHSHS) SAFE-SYNC HOT SHOE TO HOT SHOE

$50.00$49.95

(SSHSHS) SAFE-SYNC HOT SHOE TO HOT SHOE Mounts Directly to camera hot shoe and has hot shoe on top for flash Safe Syncs safely reduce any electronic flash source from up to 400 volts to less than 6 volts to the camera sync input. This is absolutely mandatory for all high end and especially all Digital Cameras.

Sale

(SSMP) MONOPLUG TO MONOPLUG SAFE-SYNC

$70.00$49.95

(SSMP) MONOPLUG TO MONOPLUG SAFE-SYNC
Heavy duty PC input protection from power packs or camera strobes. The SSMP safe sync reduces any mono-plug sync connected power pack sync voltage to the digital camera approved ssafesync level of 6V. The SSMP will safely reduce voltages from up to 400 volts.

Sale

(SSPC) SAFE-SYNC PC TO PC

$70.00$49.95

(SSPC) SAFE-SYNC PC TO PC In-line pc to pc with coiled cord. Safe Syncs safely reduce any electronic flash source from up to 400 volts to less than 6 volts to the camera sync input. This is absolutely mandatory for all high end and especially all Digital Cameras.

Sale

(WP-500B) STANDARD FLASHMETER

$105.00$89.95

(WP-500B) STANDARD FLASHMETER

Sale

(XL) ULTRA SLAVE (STANDARD RANGE-600′)

$84.00$74.95

For indoor and outdoor useage. A built-in ambient light filter prevents interference from bright sunlight or false-triggering from flickering fluorescents. With “H”-prong (Household) connector and female PC socket. Key Features:360 degree reception; even works around corners and behind obstacles! All Ultra slaves feature standard PC terminal as alternative sync connector.

Sale

1-CHANNEL “H’-PRONG RECEIVER

$131.00$94.95

1-CHANNEL “H’-PRONG RECEIVER is part of the Pro-sync SystemPro-Sync Receivers are available with either an “H”-prong (house-hold style) sync connector, or a Monoplug sync connector. Both receiver styles also feature an integral PC terminal. An unlimited number of Pro-Sync receivers can be triggered by a Pro-Sync transmitter set to the same channel.

Sale

1-CHANNEL PRO-SYNC TRANSMITTER

$184.00$139.94

1-CHANNEL PRO-SYNC TRANSMITTERPro-Sync Transmitters are supplied complete with PC to Miniplug cord. Transmitters require two “AA” batteries (not included). See system descriptions for more details.

Sale

2-CHANNEL MONOPLUG RECEIVER

$226.00$149.94

2-CHANNEL MONOPLUG RECEIVER is part of the Pro-Sync SystemThe Wein PSR-500-2E is the 2-channel Reciever in the Pro-Sync series. An unlimited number of Pro-Sync receivers can be triggered by a Pro-Sync transmitter set to the same channel. Plugged into your remote flash, the Pro-Sync receiver is in a “standby” mode. Pro-Sync receivers can easily pick up the signal from behind backdrops, soft boxes, even around a roomful of wedding guests. Nothing else can trigger the receiver, not even a full-power flash fired inches away. They work indoors or out, with a maximum range of 600 feet (indoors).The receiver draws power from the flash to which it is connected; there are no batteries to change on the receiver. This receiver is a phono plug sync type. Receivers are also available with Female Household (2 prong) connectors, so they connect directly, cordlessly, to most professional flash units or power packs. For additional versatility, each receiver also has a standard PC terminal.

Sale

HOT SHOE TO H RECEPTACLE

$40.00$29.95

HOT SHOE TO H RECEPTACLE
H Prong to H receptacle for plugging in H prong slaves like the SSL. It has 1/4-20 threaded insert for light stand.

Sale

METER-MATE 2E SYSTEM

$210.00$149.94

WEIN METER-MATE 2E SYSTEM

Includes Meter-Mate 2 Transmitter (W990750) and SSL Ultra-Slave Monoplug receiver. Transmitter includes battery.

Sale

SSR Open Channel High Power System

$247.00$189.95

SSR OPEN CHANNEL HIGH POWER SYSTEM Including SSR Transmitter and SSL Receiver (“H”-prong type). Omnidirectional, “Surround-Sync” performance at a distance of up to 600' indoors. Transmitter can be pointed anywhere because line-of-sight is not required. Transmitter meets ISO specifications for shutter contact protection. Consists of: SSR OPEN-CHANNEL SLAVE TRIGGER (W918200) With color-coded on/off switch. Battery saver circuit for 5000 shots on “AA” alkaline cells. Ready light. Locking hot-shoe mount plus cord jack. Open flash test button. 2-1/2 x 3 x 1-1/2″. 2.2 oz (less batteries)SSL ULTRA SLAVE “H”-PRONG RECEIVER (W930010)With standard “H”-prong and “PC” connectors. Two Velcro strips for mounting when using PC cord. 1-1/2 x 2-1/2 x 7/8″ 1.1 oz.Supplied with: 10″ Miniplug-to-PC cord for non-hot-shoe cameras. Extra Velcro strip.Batteries: Requires two “AA” alkaline for transmitter (not supplied).

Sale

SSRE-JR Open Channel system W/ Monoplug

$220.00$154.94

SSRE-JR OPEN CHANNEL WITH MONOPLUG with (SSL-E) Monoplug (plus PC) style receiver (W930015). For flash units with phono-plug style sync jacks. Omnidirectional, “Surround-Sync” performance now up to 150' indoors. Transmitter can be pointed anywhere because line-of-sight is not required. Designed to ISO specifications for shutter contact protection.Consists of: SSR-JR OPEN-CHANNEL TRANSMITTER (W918110)With auto shut-off battery saver circuit for 250,000 shots on standard 9V alkaline batter. Hot shoe mount plus cord jack. Open flash test button. 203/4 x 2-1/4 x 1-3/4″. 1.8 oz. (less batteries)

Wein Hold ‘Ems Invisible Earbud Retainers

$15.00$14.99

BATTLING THE EARBUD PROBLEMS

Hold’ems are retained on the exterior of the ear canal without discomfort with a skin safe adhesive that makes a secure but temporary contact on top of the skin with zero retention pressure.  The earbuds are retained snugly until the user wishes to remove them.  There is no sticky residue left on the skin.


EXTREME SPORTS


The Wein skin safe FDA approved adhesion system has been successfully tested on NIOSH CDC extreme exercise treadmills by the US Government to assure safety.  A team of expert dermatologists also evaluated skin safety in multiple trial subjects with repeat applications and found no skin irritation.


NOTE:  works on all types of earbuds.  One set of Hold’ems can be used multiple times until adhesion wears off due to skin oil or wax.  The used Hold’ems can easily be removed and new Hold’ems applied.

Newsletter