Welcome to OmegaBrandess.  Want to place an order? Give us a call: (410) 374-3250. Free shipping on most orders over $50

Shopping Cart

Showing 1–40 of 60 results

Sale

.8 pitch 1″ diameter gear

$90.00$85.50

The Zacuto 0.8 Pitch 1″ Diameter Gear is used with the Z-Focus follow focus unit. This standard-size gear allows for slow and measured lens rotation, resulting in extremely accurate focusing.

Sale

1/4 20″ Lens Support

$237.00$225.15

The 1/4 20″ Lens Support uses a 1/4 20″ screw to screw directly into a variety of lenses for more support. This lens support clamps to the rods from underneath so it can quickly be taken off the rods. The middle rod that attaches to the lens has vertical adjustment, if needed (please select the rod size below). Only thumb screw tightening is necessary, no tools required. This lens support can be used with a variety of rod sizes. Please select the rods that are being used below for the q-mount.

1/4 20″ Lens Support Includes:
Rod (please select the size of rod needed)
1/2″ to 1/4 20″ adapter
Q-Mount Lightweight (if a different size Q-Mount is needed, please call)

16″ strand of zipgear with no metal housing unit

$12.00

A 13.5″ (size can vary up to .45″) strand of zip gear with no metal housing unit.

All zipgears are a .8 pitch.

Sale

3D DRY ERASE OPERATOR’S MARKING DISC

$45.00$42.75

Zacuto’s Z-Focus 3D Dry Erase Operator’s Marking Disc is a new 3D marking disc that allows the camera operator to see focus marks while operating the camera. This disc is magnetic and dry erase. This disc fits on all Zacuto follow focuses.

Sale

Anti-Fog Protective Covers – Pack of 3

$12.00$11.40

The anti-fog protective covers offer anti-fog and protection for your Z-Finder Pro and V2 lens. These covers are expendable* as customers may lose, scratch or damage these covers over time. They are meant to give you anti-fog and to help protect the actual lens on the Z-Finder. If your Z-Finder Pro and V2 did not ship with the anti-fog protective covers then you will need the Anti-Fog Protective Cover Upgrade Kit (pack of 3 with lens cap and eyecup) in order for them to work as the lens cap is slightly different than the one you have now.

Sale

Anti-Fog Protective Covers Upgrade Kit w/ 3 lenscaps & eyecup

$22.00$20.90

The anti-fog protective cover upgrade kit includes a pack of 3 anti-fog protective covers, a lens cap, and an eyecup. The anti-fog protective covers offer anti-fog and protection for your Z-Finder Pro and V2 lens. These covers are expendable* as customers may lose, scratch or damage these covers over time. If your Z-Finder Pro and V2 did not ship with the anti-fog protective covers then you will need this upgrade kit in order for them to work as the lens cap is slightly different than the one you have now.

Sale

DSLR BASEPLATE

$420.00$399.00
Quick View

DSLR BASEPLATE

$420.00$399.00

Your Zacuto DSLR Base Plate is a highly configurable base plate which is adjustable to accommodate tall and short body cameras and cameras with battery grips. It also has mounting points to attach just about anything. It comes with 2 black 3.5″ rods.

The DSLR Base Plate can accommodate 15mm rods on all 4 sides. On the front are 2 levels for rods. The top is for mounting follow focuses, matte boxes, zoom/focus motors and lens support if space allows. The bottom rods are primarily used for lens support and single or double hand grips. These rods can be locked via allen screw so as to not come loose if using only one side for a single hand grip. The rear rod holes are for rod extensions to support battery power, wireless plates, monitors and numerous other accessories that you may need when in a tripod configuration. The rod holes on the left and right sides are for mounting the gunstock and the offset shoulder pad and counterweight for hand held use. Also mounted on these side rods can be a top handle, monitor arms and the cage which would use both sides at the same time.

On the bottom of the DSLR Base plate are your standard ¼ 20 and 3/8 16 mounting holes for tripods, mono pods, steadicams, etc. The top plate is a quick release plate that with a twist of the red knob lifts straight up and off separating your DSLR with the Z-finder attached, from the rest of your rig. The red knob also gives you left/right movement to adjust the lens position. On the front of the base plate between the rods are 2 allen screws that are used to adjust the top plate vertically. The vertical adjustment is to adjust for different camera body sizes and maintain the proper lens height.

Sale

EVF Standard Mount

$265.00$251.75






The EVF Standard Mount is used to mount the EVF onto the Zacuto DSLR Baseplate. It includes a 4.5 F/F rod that attaches to 15mm rod hole on the side of the DSLR Baseplate and a Z-Mount Zwivel. The Z-Mount Zwivel is a 15mm to 15mm rod connector that allows you to attach a vertical rod or the included EVF pan and tilt mount to the horizontal rod coming out of the side of the DSLR Baseplate. Attached to the vertical EVF pan and tilt mount is Zacuto’s Zicro Mini. This allows you quickly release the EVF from the EVF Standard Mount with the flip of the lever. The pan and tilt allows you to adjust the angle of your EVF to the desired position.
If you are looking to mount the EVF to another manufacturer’s rig check out the EVF Rod Mount. 

Sale

EVF Tri Mount Kit

$340.00$323.00
Quick View

EVF Tri Mount Kit

$340.00$323.00

The EVF Tri-Mount Kit gives the option to mount the EVF in 3 different ways. It gives you the option to use the EVF Standard Mount when shooting handheld (off the side of the Zacuto DSLR Baseplate), the Extender Viewfinder Mount when shooting on a tripod or dolly, or in quick release hotshoe mount configuration (see detailed images).

The Tri-Mount includes the EVF Standard Mount as well as a 7 M/F rod and a ZUD ¼ 20. The 7 M/F rod allows you to use the EVF in an extender viewfinder position. To use the extender viewfinder mount, remove the EVF Mount from the Z-Mount Zwivel, then screw the 7 M/F rod into the EVF Mount and then slide the Z-mount Zwivel wherever you like so that you can position your EVF to your desired position.

The included ZUD ¼ 20 allows you to free the camera and EVF from your rig and mount it quickly to the hot shoe mount of your camera. In order to use the quick release hot shoe mount effectively, the hot shoe mount included with the EVF should be mounted on your camera’s hot shoe adapter. Then screw the ZUD ¼ 20 into the hot shoe mount and leave that on your camera’s hot shoe adapter. You can then quickly release or attach the EVF from either the Standard Mount or Extender Viewfinder mount with a flip of the lever. This is essential for releasing your camera as well as your EVF from your rig in a matter of seconds.

Sale

FAST DRAW

$1,550.00$1,395.00
Quick View

FAST DRAW

$1,550.00$1,395.00

The Fast Draw is a shoulder mounted handheld system that uses our DSLR baseplate. It comes with all black rods. This kit works on any DSLR camera with or without battery grips as it is infinitely adjustable in height. The baseplate attaches to your tripod plate using the standard tripod plate screws, (2) ¼ 20 and (1) 3/8 16. Your camera can also be quickly released from the rig by turning the red knob then pulling up on your camera. The camera quick release plate stays mounted to your camera so you can quickly switch between using the camera as part of a rig or on its own. You can easily add the optional Z-Finder Pro by attaching the Z-Finder Mounting Frame (included with the Z-Finder Pro) to the camera quick release plate using two thumb screws.

Sale

FS700 Shooter

$880.00$836.00
Quick View

FS700 Shooter

$880.00$836.00

The FS700 Shooter is a compact, stable rig for FS700 users. The kits starts with our Mini Baseplate (standard 3/8 16 and ¼ 20 tripod mount underneath) with 12″ rods. The rods can slide back and forth to accommodate different lenses and accessories by flipping the red levers at the side of the plate. Our comfy shoulder pad also slides on the rods for comfort and ease of use. A 7lb weight sits behind the shoulder pad for counterbalance. Attached to the front of our rods is our FS700 Grip Relocator. The Zacuto FS700 Grip Relocator attaches to the 15mm rod with Zacuto Zwivel technology. The handle can be swiveled up and forward or straight down for individual comfort. The FS700 handle screws into the Relocator with a ¼ 20 screw and is secured in place with a standard Arri rosette. Moving camera controls to the handle means the kit can be shorter and the camera can be a little further back on your shoulder which helps with stabilization and weight distribution. The Sony removable grip features four easy-to-use buttons including Start/Stop, Photo, 4x/8x expandable focus, and push-button auto iris. The Sony grip comes with a 12 cable.

Sale

GH3 Z-Finder Frame Kit

$129.00$122.50

The GH3 Z-Finder Frame Kit from Zacuto is used to attach any model of the Zacuto Z-Finder optical viewfinder to Panasonic Lumix GH3 and GH4 digital cameras for stable, comfortable, and clear eye-level composition when shooting video. The kit combines the Zacuto Gorilla Plate V2 that attaches to the camera’s tripod socket and the Z-Finder Mounting Frame for GH3/GH4 that frames the camera’s LCD monitor and provides the attachment point for the optical viewfinder. You can use this kit to modify your current Z-Finder to fit this camera.

This mounting frame is dedicated to the GH3/GH4 and will not fit other cameras.  However, it will not fit the cameras with a battery grip attached or with the LCD monitor articulated. The frame has a rubber coating for a snug fit and to minimize damage to the camera’s screen. The Gorilla Plate attaches via a 1/4″-20 screw and features a 15mm rod port for attaching accessories.

Attaches any Z-Finder Pro optical viewfinder to the Panasonic Lumix GH3 or GH4 cameras for stable and clear eye-level composition while shooting video
Includes the Gorilla Plate V2 and Z-Finder Mounting Frame for GH3/GH4
Rubber coating on mounting frame provides tight seal to the camera and protects the LCD monitor.
Features 15mm rod port for attaching accessories
Sale

Gorilla Plate Adapter (to be used in conjunction with Zacuto Gorilla Plate)

$18.00$16.63

The Gorilla Plate Adapter centers the tripod holes on the bottom of the gorilla plate. The Gorilla Plate Adapter is used in conjunction with the Zacuto Gorilla Plate. The Gorilla Plate adapter is needed to center the lens and camera between the rods if you are using a Z-Finder Pro with another manufacturer’s rod support system supporting follow focuses and matte boxes.

Note: A height adjustable matte box is needed if using a matte box with the Gorilla plate on another manufactures plate system unless their plate system is height adjustable like the Zacuto DSLR Baseplate.

The Gorilla Plate Adapter comes with a longer 1/4 20″ screw that will replace the smaller 1/4 20″ screw that comes with the Gorilla Plate. You will need to take your screw out and use the longer one provided with the adapter to attach your camera to the plate.

Sale

HDMI Right Angle Adapter

$7.00$6.65

Re-route and protect your HDMI cable and equipment from unnecessary strain with this standard (big) HDMI right angle male to female adapter. The fixed right angle position not only gives you more space between the EVF and camera but it gives you a sturdier connection and prevents your cable from becoming loose, ensuring you have the best data signal transmission possible. This right angle HDMI adapter also converts any cable you are using to offer a 9.5mm – 10mm insertion, the ideal insertion for use with the Zacuto EVF HDMI ports.

Sale

Hotshoe Ball Mount

$48.00$45.60

Omni-directional hotshoe ball mount is perfect for mounting a Zacuto EVF to a camera hotshoe. Quick locking mechanism keeps ball mount firmly in place. One flip of the lever releases the ball to get the perfect angle for your shot. Comes with a standard ¼ 20 male screw on top. Can be mounted on any accessory with corresponding ¼ 20 female screw hole.

Kameleon EVF

$1,950.00

Kameleon EVF


A Powerful, 1080p, Micro-OLED EVF for All Your SDI and HDMI Cameras

Zacuto, the world leader in electronic viewfinder technology, introduces a new micro-OLED EVF option to their award-winning lineup. The Kameleon EVF, ‘powered by JTZ’, offers unique features like 4K HDMI input downscaled to 1080p and 3D LUTS. With this unique EVF and our trio of powerful Gratical EVFs, we have an EVF for every shooting style. Which one is right for you? Read on to find out more about the Kameleon EVF, or visit our Gratical EVF page to discover more options.
Sale

Z-Bands for Z-Finder

$16.00$15.20

Z-Bands are an option for the Zacuto Z-Finder. The Z-Bands are elastic rubber bands to help hold the Z-finder in place. They are not a way to hold the z-finder on the camera. The Z-Bands are just a security measure to hold the z-finder in place in case of accidental bumping just like the lanyard. The mounting frame and the Z-Bands must be used together. The Z-bands include 4 red aluminum balls and two elastic bands.

PLEASE NOTE: The Z-Bands will not work with the Canon 7D due to the different shape and curvature of the camera. They may work if you have a quick release adapter underneath the camera, which will allow the bands to wrap around. Please call us if you have any questions about this.

Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.

Sale

Z-Finder 3.2″ Mounting Frame for Small DSLR Bodies

$60.00$57.00

This frame is for use small bodies DSLR’s with 3.2 screens such as the Canon 5D MIII and Nikon D800. This Frame will not work if you are using a battery grip with your camera. For that you will need a battery grip frame for 3.2″ screens which we are still working on. We are also working on the 3.2″ frame for Tall Bodied Cameras and a 3.2″ Adhesive Frame.

The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off.

Sale

Z-Finder 3.2″ Mounting Frame for Small DSLR Bodies with Battery Grips

$105.00$99.75

The Z-Finder 3.2″ Mount Frame for Small DSLR Cameras from Zacuto is a frame for DSLR camera bodies with 3.2″ LCD screens, when also using a battery grip. The 3.2″ Z-Finder aircraft aluminum frame must be used in conjunction with the DSLR Gorilla Plate – which is sold separately, and included with all Pro Z-finders. The frame attaches to the Gorilla Plate with two included thumb screws and then the Gorilla plate is attached to the bottom of your camera.

The frame has a rubber coating on the back which stays against the LCD screen with pressure, without damaging the camera body or leaving any residue. The other side of the frame provides a snap-on connection between it and the Z-Finder. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you can un-do the thumb screws and slide the frame off. This frame can also attach to a Zacuto DSLR Baseplate.

Fits DSLR with 3.2″ LCD & Battery Grip
This frame is designed for use with DSLR cameras such as the Canon 5D Mark III and Nikon D800 with an attached battery grip.
Attaches to Camera via Gorilla Plate
This frame attaches directly to a Zacuto Gorilla Plate (sold separately), which attaches to the camera body. This is done by tightening the two included thumb screws. The rubber backing protects the camera body without any residue or permanent hardware.
Allows Snap-On Fit for Z-Finder
The Z-Finder quickly and easily snaps onto your camera thanks to this 3.2″ mounting frame.
Sale

Z-FINDER DUST COVER

$6.00$5.70

You’ve been asking for it, and here it is! The Z-Finder Dust Cover! The secure Z-Finder Dust Cover snaps onto the body of your Z-Finder and protects the inside from dust and debris. It’s easy to take on and off and it’s great for shooting outside and traveling. A must have for any Z-Finder user.

Sale

Z-Finder mMounting Frame for tall DSLR bodies

$95.00$90.25

The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure.. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off. This frame is used on the taller body cameras such as the Canon 1D Mark IV and Nikon D3s with 3″ screens.

Sale

Z-Finder Mounting Frame for Canon 5D

$63.00$59.85

The Z-Finder Mounting Frame is specific for the Canon 5D Mark II camera only. The Z-Finder Mounting frame that is included with the Z-Finder Pro is a Universal Frame and it will with the Canon 5D, Canon 7D, Canon T2i and more. However, if you want a frame where the red thumb screws on the gorilla plate will cover the entire frame than this is your frame.

Sale

Z-Finder Mounting Frame for small DSLR bodies

$50.00$47.50

The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off. This frame is used on the small body cameras with 3″ screens and no battery grips such as the Canon 5D Mark II, Canon 7D, Canon 550D, Canon 60D, Nikon D90, Nikon D300, D7000 and other cameras of the same size.

Sale

Z-Finder Mounting Frame for Small DSLR bodies with Battery Grips

$120.00$114.00

The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off.

This frame is used on the small body cameras with 3″ screens & battery grips such as the Canon 5D Mark II, Canon 7D, Nikon D90, Nikon D300, D7000 and other cameras of this size.

Please Note: This frame DOES NOT WORK with 3rd party battery grips.

Sale

Z-Finder Pro 2.5x for 3.2″ Screens

$395.00$375.25

THIS Z-FINDER WILL FIT THE CANON 5D MIII AND THE NIKON D800

The Z-Finder Pro 2.5x for 3.2″ screens is another one of Zacuto’s Optical Viewfinders that allows small bodied DSLR cameras with 3.2″ screens to have the correct form factor for video. It offers 2.5x focusable magnification (3x is available),a 40mm diameter Zacuto optical designed lens, an anti-fog coating protective cover, an eyecup preventing extraneous light leakage, a diopter and a field of view perfectly matched to 3 LCD screens. The diopter allows you to dial in the focus to match your eye. If you need extra focal point you can use the Z-Finder Extender Frames. The Z-Finder Pro 2.5x has a diopter range of -4.75 and up (unlimited with extender frames). These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro and extend the Z-Finder glass further way from the LCD screen for people who are farsighted.


The Z-Finder Pro uses our Gorilla Baseplate and Z-Finder mounting frame to mount to the camera. The Gorilla Baseplate attaches to the bottom of your camera using a ¼ 20 screw and the Z-Finder mounting frame attaches to the Gorilla Baseplate using thumb screws. The rubber back mounting frame does not attach to your LCD; it is held in place against your LCD with pressure. This method allows you to quickly remove the Z-Finder Pro by snapping it off the frame. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws and pulling up on the metal mounting frame to release it.

The Z-Finder Pro 2.5x for 3.2″ Screens includes:
– 3 Extender Frames
– Gorilla Plate with Z-Finder 3.2″ Mounting Frame for short bodied DSLR cameras (Canon 5D Mark III, Nikon D800)
– Lens Cap & Protective Boot
– Lanyard Hook and Lanyard
– Z-Finder Dust Cover
– 2.5x lens with an anti-fog coating protective cover
– extra anti-fog coating protective cover*


Please note:
1. If you already have a Z-Finder, you can purchase just the Z-Finder 3.2 Frame for small body cameras.

2. The anti-fog coating protective covers are expendable. They act as a protective cover to your lens so your lens does not get damaged and they also help prevent the fogging of the lens.

3. If you are using a battery grip on your small bodies DSLR camera with 3.2 screens, you will need a different frame that is not yet available. If you have a taller body camera with a 3.2 screen like the Canon 1Dx, you will need a 3.2 Tall Frame which is not yet available. These will be available around mid- June.

4. The Z-finder is a magnifier and as such will magnify the sun and could damage the LCD screen if the sun is allowed to shine directly through the Z-finder lens. This is not a defect but a physical property. Caution should be taken to avoid sun magnification.

5. The tapped holes on the bottom of the Gorilla plate are offset from the center of the lens. This is only a concern if you are using the Gorilla plate with other rigs that need the matte box in line with the lens/mounting screw hole.

Sale

Z-Finder Pro 3x for 3.2″ Screens

$395.00$375.25

THIS Z-FINDER WILL FIT THE CANON 5D MIII AND THE NIKON D800

The Z-Finder Pro 3x for 3.2″ screens is another one of Zacuto’s Optical Viewfinders that allows small bodied DSLR cameras with 3.2″ screens to have the correct form factor for video. It offers 3x focusable magnification (2.5x is available),a 40mm diameter Zacuto optical designed lens, an anti-fog coating protective cover, an eyecup preventing extraneous light leakage, a diopter and a field of view perfectly matched to 3 LCD screens. The diopter allows you to dial in the focus to match your eye. If you need extra focal point you can use the Z-Finder Extender Frames. The Z-Finder Pro 3x has a diopter range of -2.75 and up (unlimited with extender frames). These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro and extend the Z-Finder glass further way from the LCD screen for people who are farsighted.


The Z-Finder Pro uses our Gorilla Baseplate and Z-Finder mounting frame to mount to the camera. The Gorilla Baseplate attaches to the bottom of your camera using a ¼ 20 screw and the Z-Finder mounting frame attaches to the Gorilla Baseplate using thumb screws. The rubber back mounting frame does not attach to your LCD; it is held in place against your LCD with pressure. This method allows you to quickly remove the Z-Finder Pro by snapping it off the frame. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws and pulling up on the metal mounting frame to release it.

The Z-Finder Pro 3x for 3.2″ Screens includes:
– 3 Extender Frames
– Gorilla Plate with Z-Finder 3.2″ Mounting Frame for short bodied DSLR cameras (Canon 5D Mark III, Nikon D800)
– Lens Cap & Protective Boot
– Lanyard Hook and Lanyard
– Z-Finder Dust Cover
– 3x lens with an anti-fog coating protective cover
– extra anti-fog coating protective cover*


Please note:
1. If you already have a Z-Finder, you can purchase just the Z-Finder 3.2 Frame for small body cameras.

2. The anti-fog coating protective covers are expendable. They act as a protective cover to your lens so your lens does not get damaged and they also help prevent the fogging of the lens.


3. If you are using a battery grip on your small bodies DSLR camera with 3.2 screens, you will need a different frame that is not yet available. If you have a taller body camera with a 3.2 screen like the Canon 1Dx, you will need a 3.2 Tall Frame which is not yet available. These will be available around mid- June.

4. The Z-finder is a magnifier and as such will magnify the sun and could damage the LCD screen if the sun is allowed to shine directly through the Z-finder lens. This is not a defect but a physical property. Caution should be taken to avoid sun magnification.

5. The tapped holes on the bottom of the Gorilla plate are offset from the center of the lens. This is only a concern if you are using the Gorilla plate with other rigs that need the matte box in line with the lens/mounting screw hole.

Sale

Z-Lite Counterweight

$185.00$175.75

The Z-lite is a (just under) 3.5 lb. counterbalance weight to balance camera packages that are slightly front heavy. It slides onto 15mm rods, either both rods or on one rod. The Z-Lite is stainless steel with rubber o-rings to prevent hard contacts. A built in lever makes for easy mounting and removal. The Z-lite is great for DSLR packages.

ZACUTO 1/4 20″ DSLR SCREW IS A REPLACEMENT SCREW FOR DSLR BASEPLATE AND GORILLA PLATE

$12.00

Replacement 1/4 20″ screw for the following items:

DSLR Baseplate
Gorilla Plate

This screw is NOT a replacement screw for the Gorilla Plate Adapter.

Sale

ZFinder for C100

$365.00$346.75
Quick View

ZFinder for C100

$365.00$346.75

The C100 Z-Finder Pro is an optical viewfinder, specifically designed to attach to the Canon C100 cinema camera LCD. This Z-Finder will magnify the LCD screen by 1.8x and has a diopter for specific focus tuning. It cuts out any extraneous light and offers an initial point of stability by pressing your eye against the large eyecup. The C100 Z-finder Pro comes with a 40mm diameter Zacuto optical lens, anti-fog coated protective covers, and all necessary additional accessories for the Canon C100. The diopter allows you to dial in the focus to match your eye. If you need extra focal points you can use the included Z-Finder Extender Frames. These are semi-permanent stackable frames that attach to the body of the Z-Finder Pro and extend the Z-Finder glass further away from the LCD screen for people who are farsighted.


 The C100 Z-Finder Pro is comprised of three important parts. The first is the viewfinder itself with the lens, diopter, and eyecup. The second is the mounting system. The mount slides onto the Canon C100 LCD screen when articulated. The viewfinder snaps on and off the frame and can hang around your neck on the included lanyard when not in use. The third part is a set of Z-Bands that attach to your camera via a screw hole on the film panel included on the left side of the camera and then clip into two ball sockets on the Z-Finder itself. These Z-Bands add tension and support to the mount so the LCD screen and viewfinder can be set at any angle. Without the use of the Z-Bands, the hinge on the LCD screen cannot support the viewfinder (in any tilted up positions).


 The C100 Z-Finder Pro is specifically designed for the Canon C100 camera and is not compatible with any other cameras or alternate set ups. The C100 Z-Finder Pro is designed for use with the standard battery included with the Canon C100 camera. (Canon – BP-955 Lithium-Ion Battery Pack-5200mAh) There may not be clearance for larger batteries.

Sale

ZipGear Lens Kit (4) .8 pitch gears, fits all lenses

$265.00$251.75

Zacuto Universal ZipGear prime lens kit includes four 13.5″ adjustable gears and four gear locking housings. This kit is perfect for four prime lenses. Just wrap the gear around the lens, cut to size, press on gear locking housing and tighten. Installation takes one minute.

Sale

ZipGear Universal (fits any lens) (1) 13.5″ .8 pitch gear, fits all lenses

$68.00$64.59

Zacuto Universal ZipGear (any lens), 1 13.5-inch adjustable gear. Works on any camera, prime or zoom lens. Kit comes with 13.5″ plastic gear and black gear locking housing. Just wrap the gear around the lens, cut to size, press on gear locking housing and tighten. Installation takes one minute.

All zipgears are a .8 pitch.

Newsletter