Shopping Cart

Showing 1–16 of 17 results

Sale

Z-FINDER DUST COVER

$6.00$5.70

You’ve been asking for it, and here it is! The Z-Finder Dust Cover! The secure Z-Finder Dust Cover snaps onto the body of your Z-Finder and protects the inside from dust and debris. It’s easy to take on and off and it’s great for shooting outside and traveling. A must have for any Z-Finder user.

Sale

Anti-Fog Protective Covers – Pack of 3

$12.00$11.40

The anti-fog protective covers offer anti-fog and protection for your Z-Finder Pro and V2 lens. These covers are expendable* as customers may lose, scratch or damage these covers over time. They are meant to give you anti-fog and to help protect the actual lens on the Z-Finder. If your Z-Finder Pro and V2 did not ship with the anti-fog protective covers then you will need the Anti-Fog Protective Cover Upgrade Kit (pack of 3 with lens cap and eyecup) in order for them to work as the lens cap is slightly different than the one you have now.

Sale

Z-Bands for Z-Finder

$16.00$15.20

Z-Bands are an option for the Zacuto Z-Finder. The Z-Bands are elastic rubber bands to help hold the Z-finder in place. They are not a way to hold the z-finder on the camera. The Z-Bands are just a security measure to hold the z-finder in place in case of accidental bumping just like the lanyard. The mounting frame and the Z-Bands must be used together. The Z-bands include 4 red aluminum balls and two elastic bands.

PLEASE NOTE: The Z-Bands will not work with the Canon 7D due to the different shape and curvature of the camera. They may work if you have a quick release adapter underneath the camera, which will allow the bands to wrap around. Please call us if you have any questions about this.

Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.

Sale

Gorilla Plate Adapter (to be used in conjunction with Zacuto Gorilla Plate)

$17.50$16.63

The Gorilla Plate Adapter centers the tripod holes on the bottom of the gorilla plate. The Gorilla Plate Adapter is used in conjunction with the Zacuto Gorilla Plate. The Gorilla Plate adapter is needed to center the lens and camera between the rods if you are using a Z-Finder Pro with another manufacturer’s rod support system supporting follow focuses and matte boxes.

Note: A height adjustable matte box is needed if using a matte box with the Gorilla plate on another manufactures plate system unless their plate system is height adjustable like the Zacuto DSLR Baseplate.

The Gorilla Plate Adapter comes with a longer 1/4 20″ screw that will replace the smaller 1/4 20″ screw that comes with the Gorilla Plate. You will need to take your screw out and use the longer one provided with the adapter to attach your camera to the plate.

Sale

Anti-Fog Protective Covers Upgrade Kit w/ 3 lenscaps & eyecup

$22.00$20.90

The anti-fog protective cover upgrade kit includes a pack of 3 anti-fog protective covers, a lens cap, and an eyecup. The anti-fog protective covers offer anti-fog and protection for your Z-Finder Pro and V2 lens. These covers are expendable* as customers may lose, scratch or damage these covers over time. If your Z-Finder Pro and V2 did not ship with the anti-fog protective covers then you will need this upgrade kit in order for them to work as the lens cap is slightly different than the one you have now.

Sale

Z-Finder Mounting Frame for small DSLR bodies

$50.00$47.50

The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off. This frame is used on the small body cameras with 3″ screens and no battery grips such as the Canon 5D Mark II, Canon 7D, Canon 550D, Canon 60D, Nikon D90, Nikon D300, D7000 and other cameras of the same size.

Sale

Z-Finder 3.2″ Mounting Frame for Small DSLR Bodies

$60.00$57.00

This frame is for use small bodies DSLR’s with 3.2 screens such as the Canon 5D MIII and Nikon D800. This Frame will not work if you are using a battery grip with your camera. For that you will need a battery grip frame for 3.2″ screens which we are still working on. We are also working on the 3.2″ frame for Tall Bodied Cameras and a 3.2″ Adhesive Frame.

The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off.

Sale

Z-Finder Mounting Frame for Canon 5D

$63.00$59.85

The Z-Finder Mounting Frame is specific for the Canon 5D Mark II camera only. The Z-Finder Mounting frame that is included with the Z-Finder Pro is a Universal Frame and it will with the Canon 5D, Canon 7D, Canon T2i and more. However, if you want a frame where the red thumb screws on the gorilla plate will cover the entire frame than this is your frame.

Sale

Z-Finder mMounting Frame for tall DSLR bodies

$95.00$90.25

The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure.. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off. This frame is used on the taller body cameras such as the Canon 1D Mark IV and Nikon D3s with 3″ screens.

Sale

Z-Finder 3.2″ Mounting Frame for Small DSLR Bodies with Battery Grips

$105.00$99.75

The Z-Finder 3.2″ Mount Frame for Small DSLR Cameras from Zacuto is a frame for DSLR camera bodies with 3.2″ LCD screens, when also using a battery grip. The 3.2″ Z-Finder aircraft aluminum frame must be used in conjunction with the DSLR Gorilla Plate – which is sold separately, and included with all Pro Z-finders. The frame attaches to the Gorilla Plate with two included thumb screws and then the Gorilla plate is attached to the bottom of your camera.

The frame has a rubber coating on the back which stays against the LCD screen with pressure, without damaging the camera body or leaving any residue. The other side of the frame provides a snap-on connection between it and the Z-Finder. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you can un-do the thumb screws and slide the frame off. This frame can also attach to a Zacuto DSLR Baseplate.

Fits DSLR with 3.2″ LCD & Battery Grip
This frame is designed for use with DSLR cameras such as the Canon 5D Mark III and Nikon D800 with an attached battery grip.
Attaches to Camera via Gorilla Plate
This frame attaches directly to a Zacuto Gorilla Plate (sold separately), which attaches to the camera body. This is done by tightening the two included thumb screws. The rubber backing protects the camera body without any residue or permanent hardware.
Allows Snap-On Fit for Z-Finder
The Z-Finder quickly and easily snaps onto your camera thanks to this 3.2″ mounting frame.
Sale

Z-Finder Mounting Frame for Small DSLR bodies with Battery Grips

$120.00$114.00

The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off.

This frame is used on the small body cameras with 3″ screens & battery grips such as the Canon 5D Mark II, Canon 7D, Nikon D90, Nikon D300, D7000 and other cameras of this size.

Please Note: This frame DOES NOT WORK with 3rd party battery grips.

Sale

GH3 Z-Finder Frame Kit

$129.00$122.50

The GH3 Z-Finder Frame Kit from Zacuto is used to attach any model of the Zacuto Z-Finder optical viewfinder to Panasonic Lumix GH3 and GH4 digital cameras for stable, comfortable, and clear eye-level composition when shooting video. The kit combines the Zacuto Gorilla Plate V2 that attaches to the camera’s tripod socket and the Z-Finder Mounting Frame for GH3/GH4 that frames the camera’s LCD monitor and provides the attachment point for the optical viewfinder. You can use this kit to modify your current Z-Finder to fit this camera.

This mounting frame is dedicated to the GH3/GH4 and will not fit other cameras.  However, it will not fit the cameras with a battery grip attached or with the LCD monitor articulated. The frame has a rubber coating for a snug fit and to minimize damage to the camera’s screen. The Gorilla Plate attaches via a 1/4″-20 screw and features a 15mm rod port for attaching accessories.

Attaches any Z-Finder Pro optical viewfinder to the Panasonic Lumix GH3 or GH4 cameras for stable and clear eye-level composition while shooting video
Includes the Gorilla Plate V2 and Z-Finder Mounting Frame for GH3/GH4
Rubber coating on mounting frame provides tight seal to the camera and protects the LCD monitor.
Features 15mm rod port for attaching accessories
Sale

Z-Finder Pro 3x for 3.2″ Screens

$395.00$375.25

THIS Z-FINDER WILL FIT THE CANON 5D MIII AND THE NIKON D800

The Z-Finder Pro 3x for 3.2″ screens is another one of Zacuto’s Optical Viewfinders that allows small bodied DSLR cameras with 3.2″ screens to have the correct form factor for video. It offers 3x focusable magnification (2.5x is available),a 40mm diameter Zacuto optical designed lens, an anti-fog coating protective cover, an eyecup preventing extraneous light leakage, a diopter and a field of view perfectly matched to 3 LCD screens. The diopter allows you to dial in the focus to match your eye. If you need extra focal point you can use the Z-Finder Extender Frames. The Z-Finder Pro 3x has a diopter range of -2.75 and up (unlimited with extender frames). These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro and extend the Z-Finder glass further way from the LCD screen for people who are farsighted.


The Z-Finder Pro uses our Gorilla Baseplate and Z-Finder mounting frame to mount to the camera. The Gorilla Baseplate attaches to the bottom of your camera using a ¼ 20 screw and the Z-Finder mounting frame attaches to the Gorilla Baseplate using thumb screws. The rubber back mounting frame does not attach to your LCD; it is held in place against your LCD with pressure. This method allows you to quickly remove the Z-Finder Pro by snapping it off the frame. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws and pulling up on the metal mounting frame to release it.

The Z-Finder Pro 3x for 3.2″ Screens includes:
– 3 Extender Frames
– Gorilla Plate with Z-Finder 3.2″ Mounting Frame for short bodied DSLR cameras (Canon 5D Mark III, Nikon D800)
– Lens Cap & Protective Boot
– Lanyard Hook and Lanyard
– Z-Finder Dust Cover
– 3x lens with an anti-fog coating protective cover
– extra anti-fog coating protective cover*


Please note:
1. If you already have a Z-Finder, you can purchase just the Z-Finder 3.2 Frame for small body cameras.

2. The anti-fog coating protective covers are expendable. They act as a protective cover to your lens so your lens does not get damaged and they also help prevent the fogging of the lens.

3. If you are using a battery grip on your small bodies DSLR camera with 3.2 screens, you will need a different frame that is not yet available. If you have a taller body camera with a 3.2 screen like the Canon 1Dx, you will need a 3.2 Tall Frame which is not yet available. These will be available around mid- June.

4. The Z-finder is a magnifier and as such will magnify the sun and could damage the LCD screen if the sun is allowed to shine directly through the Z-finder lens. This is not a defect but a physical property. Caution should be taken to avoid sun magnification.

5. The tapped holes on the bottom of the Gorilla plate are offset from the center of the lens. This is only a concern if you are using the Gorilla plate with other rigs that need the matte box in line with the lens/mounting screw hole.