Welcome to OmegaBrandess.  Want to place an order? Give us a call: (410) 374-3250. Free shipping on most orders over $50

Shopping Cart

Showing 1–24 of 28 results

EKTACOLOR RA Developer Regenerator 12/55 / Part A / To A / To make 150 gal

$412.75

Kodak Ektacolor RA Chemistry is used in the processing of color prints RA-4 process, developed in, tray, drum, or rotary tube developing.

This regenerator enables you to collect and reuse overflow from Ektacolor RA Developer 12. With this regenerator, you do not need to use ion-exchange equipment. This Developer Regenerator come in a size to prepare 150 gallons of replenisher from developer overflow.

Chemicals are supplied as all-liquid concentrates for easy mixing and handling.

SDS Part A

SDS Working Solution


Reversal Bath and Replenisher, Process E-6AR / To make 100 gal

$147.32

Kodak E6 Processing Chemicals are used provide consistent, high-quality results when processing E6 transparency film, with a variety of processing methods and equipment.

These chemicals are ideal for processing Kodak Ektachrome, Kodak Professional Ektachrome, and Kodak Elite Chrome Films.

Process E-6 requires each of the following chemicals:

  • first developer,
  • reversal bath,
  • color developer,
  • pre-bleach,
  • bleach,
  • fixer, and
  • final rinse.

To mix this reversal bath: use the replenisher at 60 percent of the normal concentration (i.e., if the label instructions indicate 62 mL/L of concentrate, use 37 mL/L.

For in-line dilution replenishment systems, use the chemicals that contain the E-6AR (automatic replenishment) designation. Concentrates are generally packaged in 5-gallon flexible containers.

Process E-6AR, offers lower replenishment rates and reduced effluent.

EKTACOLOR RA Developer Replen / KIT To make 25 gal

$278.99

Kodak Ektacolor RA Chemistry is used in the processing of color prints RA-4 process, developed in, tray, drum, or rotary tube developing.

Use this Developer Replenisher RT To prepare a developer for rotary-tube and drum processors.

This developer has built-in protection from oxidation and evaporation that makes it particularly suitable for rollertransport processors and continuous processors with low utilization.

Mix this replenisher with Ektacolor RA Developer Starter and water according to the instructions packaged with the chemicals.

Chemicals are supplied as all-liquid concentrates for easy mixing and handling

SDS Part A

SDS Part B

SDS Part C


FLEXICOLOR Developer Replenisher LORR / To make 25 gal

$335.26

Kodak Flexicolor Chemicals, Process C-41, are for processing Kodak color negative films such as Kodak Professional Porta Films, as well as and other manufacturers’ films.

These chemicals are supplied in all-liquid concentrates for easy mixing, and designed for optimum results in all types of processors.

One of each of the following chemicals is needed to complete the process:

  • Kodak Flexicolor Developer
  • Kodak Flexicolor Bleach III
  • Kodak Flexicolor Fixer & Replenisher
  • Kodak Flexicolor Stabilizer III & Replenisher

Flexicolor Developer Replenisher LORR (C-41) bottle to make 25 gallons. This developer offers you the same performance as Kodak Flexicolor Developer Replenisher except with lower replenishment rates.

This has many benefits for your lab developer effluent discharge reduction of approximately 50 percent, less chemical mixing, and lower cost per square foot of film processed.

Processor utilization is not a factor; you can use Flexicolor Developer Replenisher LORR at any utilization level. Primarily recommended for use in continuous processors.

Note: C-41RA film process cycle is the shortest of the Process C-41 cycles and the one most commonly used in minilabs.

Use Kodak Flexicolor Bleach RA Bleach Replenisher NR and Kodak Flexicolor RA Fixer and Replenisher in this cycle. It requires special equipment, higher agitation. Intended to be a washless cycle.

SDS Part A

SDS Part C

SDS Working Solution


FLEXICOLOR Final Rinse and Replenisher, C-41 / to make 75GAL.

$64.09

The Kodak FLEXICOLOR Final Rinse and Replenisher for C-41 features redeveloped surfactants to reduce deposits and drying marks on processed color negative films. As a result, both the processed film and the seasoned working tank solution will be cleaner, requiring less maintenance and less frequent dumping of working tanks. This final rinse solution contains no stabilizing agent, which subsequently allows labs to forgo formaldehyde training or do the associated record-keeping required by OSHA guidelines.

This single solution mix makes 50L of working solution.

FLEXICOLOR SM Tank Fixer / C-41SM – CASE OF 2 5L BOTTLES

$135.28

The FLEXICOLOR SM Tank Fixer from Kodak. You can use this fixer in the C-41SM minilabs tank solutions, small tanks, and tube-type processors without replenishment.

SDS

HZEKTACLR RA Bleach-Fix&Repln NR/Part C/ To mak 20 gal

$14.57

HZ** EKTACLR RA Bleach-Fix & Repln NR/Part C/ To make 20 gal

HZ**–This item is a HazMat item any orders that include Hazmat Items will incur a per box fee over and above the shipping stated.

HZEKTACOLOR RA Bleach-Fix and Replenisher NR / Bulk Pack All Parts make 20gal

$2,463.13

Kodak Ektacolor RA Chemistry is used in the processing of color prints RA-4 process, developed in, tray, drum, or rotary tube developing.

Use this Bleach-Fix NR for continuous processors with high utilization, it features a low replenishment rate. (It is not recommended for use in roller transport processors.)

Be especially careful not to contaminate the developer with bleach-fix; even minute amounts of bleach-fix can severely contaminate the developer.

To prevent developer contamination, use a separate mixing container for the developer.

Chemicals are supplied as all-liquid concentrates for easy mixing and handling

HZ**–This item is a HazMat item any orders that include Hazmat Items will incur a $25.00 per box fee over and above the shipping stated.

Newsletter