Welcome to OmegaBrandess.  Want to place an order? Give us a call: (410) 374-3250. Free shipping on most orders over $50

Shopping Cart

Showing 1–40 of 44 results

$ 20-1/2″ X 30 YDS. FUSION 4000 PLUS

$128.00$127.99

Fusion® 4000 is a pure, ultra-clear, thermal-activated, 100% inert adhesive film that melts during heating, bonds as it cools and is removable when reheated. It can be used to mount lithographs, newsprint, photographs, art papers, engravings, silk, canvas, foils and other papers. It also is ideal for mounting different shapes and sizes.

$ 26″ X 5 YDS. – COATED TWO SIDES-RELEASE PAPER

$56.00$55.99

Bienfang® Release Paper is a re-usable, protective overlay made of smooth, white paper coated with silicone. It is necessary for dry mounting and laminating and keeps the press clean.

$ 34″ X 30 YDS. – COATED ONE SIDE-RELEASE PAPER

$210.00$209.99

Bienfang® Release Paper is a re-usable, protective overlay made of smooth, white paper coated with silicone. It is necessary for dry mounting and laminating and keeps the press clean.

$ COMMERCIAL 210M – 115V

$2,766.00$2,765.99

The Seal 210M Dry Mount Press is a table-top, heat-activated dry mounting system. It utilizes uniform heat and pressure to mount, laminate and texturize prints on substrates up to 1″ thick. Comes with a direct temperature readout for precise control. Manufacturer’s warranty covers on-site service only.

Develops 1200 pounds of pressure on its 18.5 x 23″ (47 x 58cm) platen
Free-floating platen seats the work without shifting and provides uniform pressure across the entire surface
Extended temperature range thermostatically controlled from 150-300ºF (66-149ºC)
Non-stick surface on platen
Platen Size 23 x 18.5″ / 58.4 x 47 cm
Maximum Thickness 1″ / 2.5 cm
Temperature Range 150 to 300°F / 65 to 149°C
Dimensions W: 27 x D: 23 x H: 11 to 20″ / W: 66 x D: 58.4 x H: 27.9 to 50.8 cm

$ UNSTIK – 32 FLUID OZ.CAN

$30.00$29.99

HazMat product, subject to additional freight charges.

UnStik™ is a special releasing solvent used to remove artwork from pressure sensitive and heat-assist mounting adhesives. UnStik™ will not damage your paper prints or cause inks to bleed. It can also be used to clean fingerprints and adhesive residue off of artwork without any damage. -32 fl. oz bottles, 

25″X50′ PRE-PIERCED ULTRA MATTE ROLL FINISH GUARD

$116.00

Add the right finishing touch and protect your mounting and framing projects with Bienfang® Finish Guard™ UV Laminating Films. Coated on one side with a permanent adhesive that bonds when heated.
Bienfang® Finish Guard™ UV Laminating Films shield framing and mounting projects against the damage that can be caused by ultraviolet rays. The films are coated on one side with a permanent adhesive that bonds when heated to provide a durable and lightweight alternative to glass. Five distinct finishes let you customize the end result to meet your framing needs. Lustre offers a semi-gloss finish that reduces glare and reflection. Matte provides a soft, non-reflective surface in either a low-gloss satin or higher-gloss ultra finish. Canvas resembles the rich texture of artist’s canvas with a soft sheen and Linen adds a light textural surface, also with a soft sheen. Finish Guard™ UV films are ideal for protecting posters, graphics, photos, prints, portraits, reproductions and other artwork.

250 COMMERCIAL PRESS W/ DIGITAL DISPLAY 115V PRESS 18-1/2″X 23″ 75 LBS.

$3,180.00$3,179.99

The Bienfang Masterpiece 250 & 550 Mechanical Press are versatile, dependable and will handle an array of sizes and artistic applications. Both the 250 & 550 models have an easy to read digital display with touch pad controls and pre-set programs.

Applications:

  • Heat Mounting
  • Laminating
  • Applying Texture

Operational Features:

  • All have capability of finishing pieces larger than press itself
  • Adjustable pressure for materials up to 1″ thick
  • Easy to clean platen surfaces

34″ X 30 YDS. – COATED TWO SIDES-RELEASE PAPER

$194.00$193.99

Bienfang® Release Paper is a re-usable, protective overlay made of smooth, white paper coated with silicone. It is necessary for dry mounting and laminating and keeps the press clean.

40″ X 60″ – 1 BOARD (PACKAGED 10 BOARDS PER CARTON EASY-PEEL RLS BRDS

$36.00$35.99

Bienfang® Release Boards are durable, reusable boards, coated with silicone on both sides. Release Boards may be used in place of Release Paper with the added advantage of increased durability and easier handling. They are ideal for preventing platen lines on oversized material mounted in a mechanical press. Available in sizes for most mounting presses.

550 MASTERPIECE PRESS 230 VOLT

$6,501.00$6,500.99

For size, for ease of function, and for flexibility, there is not another mechanical press like it in the framing market today. Years of research into the specific needs of framing professionals has resulted in a mounting press that can be relied upon for artistic achievement whether your project involves black/white or full color photos, graphics, posters or other oversize artwork.

Ideal applications for the Masterpiece 550 Mechanical Press include creative dry mounting, laminating and applying texture to artwork of all shapes and sizes. Manufacturer’s warranty covers on-site service only.

Easy to read digital display with touch pad
Now twice as wide, a full 9″ opening makes it easier to use and clean
Pre-set programs for Biengfang adhesives and laminates major applications
User-set programs let you customize time and temperature
Provides a working space of 24 x 36″
Capable of finishing pieces larger than the press itself
Accepts materials up to 1″ thick
Extended temperature range thermostat control adjusts from 100-300° F (38-150° C) and improves regulation to with +/- 5° F
Superior heating system quickly brings the platen to uniform temperature ensuring 100% bonding
Platen surface is specially coated to keep adhesives from sticking
Engineered to require minimum maintenance with durable framework and built-to-last construction

COMMERCIAL 250 PRESS INTERNATIONAL 230V

$3,442.00$3,441.99

The Seal 250 Commercial Dry Mount Press is a table-top, heat-activated dry mounting system. It utilizes uniform heat and pressure to mount, laminate, and texturize prints on substrates up to 1″ thick. It comes with direct temperature readout for precise control. Manufacturer’s warranty covers on-site service only.

Note: This item is ONLY wired for 230V, European voltage.

Fast Operation
Superior heating system quickly brings the platen to uniform temperature ensuring 100% bonding.
Extended Temperature Range
Thermostat control adjusts from 100-300°F (38-150°C) to cover a wide range of operating temperatures.
Programmed Heating Cycles
Temperature and time may be set by stored programs in control unit.
Temperature Readout
Platen temperature is indicated on LED display on top of unit.
Cycle Time Readout
Remaining time in the cycle is displayed.
Oversize Capacity
Design allows processing of materials larger than the press platen by sliding the work side-to-side or out of the front or back of the press.
Extra-Wide Opening
Opens a full 9″ (23 cm) for 550 and 10″ (25 cm) for 250 to provide easy access to platen surface
Easy Pressure Adjustment
Pressure adjusts and locks in seconds to accept materials up to 1″ (25mm) thick.
Non-Stick Surface
Platen surface is specially coated to help keep adhesives from sticking.
Free-Floating Platen
Seats evenly on the work without shifting to provide uniform pressure across the entire surface
Rugged Construction
Steel cantilevers increase durability and allow maximum pressure on work within the press; metal top and base construction adds ruggedness.

FINISH GUARD 41X50 CANVAS ROLL

$234.00

Add the right finishing touch and protect your mounting and framing projects with Bienfang® Finish Guard™ UV Laminating Films. Coated on one side with a permanent adhesive that bonds when heated.
Bienfang® Finish Guard™ UV Laminating Films shield framing and mounting projects against the damage that can be caused by ultraviolet rays. The films are coated on one side with a permanent adhesive that bonds when heated to provide a durable and lightweight alternative to glass. Five distinct finishes let you customize the end result to meet your framing needs. Lustre offers a semi-gloss finish that reduces glare and reflection. Matte provides a soft, non-reflective surface in either a low-gloss satin or higher-gloss ultra finish. Canvas resembles the rich texture of artist’s canvas with a soft sheen and Linen adds a light textural surface, also with a soft sheen. Finish Guard™ UV films are ideal for protecting posters, graphics, photos, prints, portraits, reproductions and other artwork.

FLOOR STAND FOR 4468

$1,365.00$1,364.99
Quick View

FLOOR STAND FOR 4468

$1,365.00$1,364.99

FLOOR STAND FOR 4468

FUSION 4000 48-1/2X90 FT. (OVERSIZE)

$293.00$292.99

Fusion 4000 is a pure, ultra-clear, thermal-activated, 100% inert adhesive film that melts during heating, bonds as it cools and is removable when reheated. It can be used to mount lithographs, newsprint, photographs, art papers, engravings, silk, canvas, foils and other papers. It also is ideal for mounting different shapes and sizes.

JUMBO 160M – 115V

$2,354.00$2,353.99
Quick View

JUMBO 160M – 115V

$2,354.00$2,353.99

The Bienfang 160M is a high-quality, intermediate-sized press designed for professional dry mounting, laminating and texturing by professional photographers, artists, and educators

The Seal 160M Jumbo press is a table-top, heat-activated dry mounting system that utilizes heat and pressure to mount, laminate and texturize prints on substrates up to 1″ thick. Direct temperature readout for precise control. 115V, 8.3amps, 1000W. Manufacturer’s warranty covers on-site service only.

Develops 860 lbs. pressure on its large 18.5 x 15.5″ platen
Free floating platen doesn’t shift
Extra-wide opening
Simple pressure adjustments
Extended temperature range thermostatically controlled from 150-350F degrees
Non-stick platen

RAGMOUNT 48in.x300 ft. ROLL (OVERSIZE)

$840.00$839.99

RagMount is a heat-activated adhesive with a 100% cotton rag tissue carrier. This is the only adhesive on the market today that is designed for dry mounting Giclee prints. It can also be used in dry mounting digital prints to fine art paper and in traditional dry mounting applications.

RAGMOUNT 8.5 X 11 IN. 25 SHEET PACK

$22.00$21.99

RagMount is a heat-activated adhesive with a 100% cotton rag tissue carrier. This is the only adhesive on the market today that is designed for dry mounting Giclee prints. It can also be used in dry mounting digital prints to fine art paper and in traditional dry mounting applications.

TACKING IRON WITH PRE- SET HEAT CONTROL

$122.00$121.99

The Tacking Iron from Seal /Bienfang is used when tacking a print into position on a substrate using the base of the shoe to melt heat-activated adhesives. Use of a tacking iron prevents the print from shifting position while in the dry mounting press.

Non-stick surface on the shoe
Pre-set heat control

TOGGLE PLATE BOLT KIT

$139.00$138.99

TOGGLE PLATE BOLT KIT

VACUUM PRESS 4468H

$10,450.00$10,449.99
Quick View

VACUUM PRESS 4468H

$10,450.00$10,449.99

The Bienfang® Vacuum Press is the preferred choice of professionals. The Vacuum Press offers a space-saving work surface and the option of processing several pieces of varying size and thickness simultaneously. Complete with digital display and touch pad controls, it is guaranteed to provide years of service with its durable framework and built-to-last construction. Owning a Bienfang Press includes Bienfang Technical Support for all of your application and equipment needs.

Applications:

  • Cold mounting
  • Laminating
  • Heat mounting
  • Appling texture
  • Pre-Drying Materials

Operational Features

  • Eliminates pre-drying steps
  • Available in three sizes (3648H, 4468H, 5298H)
  • Dura-Box alloy frame with tight vacuum seal
  • Space-saving work surface
  • Maintenance-free vacuum pump
  • Programmable system controller with factory-installed programs for temperature and dwell time
  • Easy-read digital display
  • Touch-pad controls
  • End-of-cycle signal

VACUUM PRESS 5298H

$17,520.00$17,519.99
Quick View

VACUUM PRESS 5298H

$17,520.00$17,519.99

The Seal 5298H Vacuum Dry Mount Press is another leap forward for the Seal/Bienfang company. As the leading company for photo finishing and mounting, Seal has produced a dry mount press that also pre-dries your board, thereby saving time. This press can handle big jobs and handles multiple pieces at the same time.

Bienfang Vacuum Presses are designed to automatically control the four main variables of mounting: moisture, pressure temperature and time. This assures consistent results. There are two simple ways to operate the Vacuum Press: by setting each control individually or by using convenient programmed settings. Some settings are preset at the factory but you can also set your own programs for procedures you conduct repeatedly.

Platen temperature is maintained at +/- 2° F of the set temperature. Manufacturer’s warranty covers on-site service only.

Touch-pad controls assure consistency and are user friendly
Easy-read digital displays
Programmable System Controller with 6 factory-installed programs for temperature and dwell time
End-of-cycle signal
Sturdy Dura-Box alloy frame provides a tight vacuum seal and extra durability
Space-saving work surface
Maintenance-free vacuum
Built-in floor stand


$ 20″ X 20″ WEIGHT

$330.00$329.99

This heavy-duty, metal weight with handles keeps processed materials flat while cooling.

$ 42″ X 30 YDS. – COATED ONE SIDE-RELEASE PAPER

$241.00$240.99

Bienfang® Release Paper is a re-usable, protective overlay made of smooth, white paper coated with silicone. It is necessary for dry mounting and laminating and keeps the press clean.

$ 42″ X 30 YDS. – COATED TWO SIDES-RELEASE PAPER

$259.00$258.99

Bienfang® Release Paper is a re-usable, protective overlay made of smooth, white paper coated with silicone. It is necessary for dry mounting and laminating and keeps the press clean.

40.5″ x 90′ BUFFERMOUNT ROLL

$214.00

BufferMount® is a very versatile and safe acid-free tissue. It is coated on both sides with a low-temperature, inert adhesive that melts during heating, bonds as it cools and is removable when reheated. BufferMount is specially designed for mounting reproductions, photographs and posters, as well as thin, delicate materials such as rice paper, sheepskin, tissue and silk.

550 MASTERPIECE PRESS WITH ELECTRONIC TEMP. CONTROL 120V/60HZ

$7,056.00$7,055.99

The Bienfang Masterpiece 250 & 550 Mechanical Press are versatile, dependable and will handle an array of sizes and artistic applications. Both the 250 & 550 models have an easy to read digital display with touch pad controls and pre-set programs.

Applications:

  • Heat Mounting
  • Laminating
  • Applying Texture

Operational Features:

  • All have capability of finishing pieces larger than press itself
  • Adjustable pressure for materials up to 1″ thick
  • Easy to clean platen surfaces

HEATER FOR 4468 PRESS

$603.00$602.99

HEATER FOR 4468 PRESS

HEATER KIT 115V FOR 500T PRESS

$413.00$412.99

HEATER KIT 115V FOR 500T PRESS

Power Board

$314.00$313.99
Quick View

Power Board

$314.00$313.99

REPL.CONTROL PANEL 3648H/4468H

RAGMOUNT 40.5″X150′ ROLL

$430.00$429.99

RagMount is a heat-activated adhesive with a 100% cotton rag tissue carrier. This is the only adhesive on the market today that is designed for dry mounting Giclee prints. It can also be used in dry mounting digital prints to fine art paper and in traditional dry mounting applications.

RAGMOUNT 48in.x150ft. ROLL (OVERSIZE)

$504.00$503.99

RagMount is a heat-activated adhesive with a 100% cotton rag tissue carrier. This is the only adhesive on the market today that is designed for dry mounting Giclee prints. It can also be used in dry mounting digital prints to fine art paper and in traditional dry mounting applications.

Newsletter