Shopping Cart

Showing 1–16 of 19 results

GEL AND DIFFUSION MATERIAL HOLDER

$60.99

Features a deep rear rim and snaps in place on the front rim of all Novatron’s 6-1/2″ reflectors. It fully covers the Flashhead’s reflector and avoids any annoying light leakage. The 8″x 8″ channel holds any one of the filters found in the 4021 Kit.

This Gel and Diffusion Material Holder features a deep rear rim and snaps in place on the front rim of all Novatron’s 6.5″ reflectors. It fully covers the instrument’s reflector to avoid spill. The 8″x 8″ channel holds any one of the filters found in the 4021 Gel And Diffusion Material Kit.

Use it with our flash heads that have built-in reflectors that fits all of our current bare tube heads, Monolights, and continuous lights.

 

DIFFUSION SHEETS (5) PIECES OF 8 x 8 INCH

$20.99

These diffusion gels will fit onto the front of a Novatron, or any reflector measuring 8″ in diameter, or less. They will soften, and decrease the light output.

Our 4008 include 5 sheets of a tough diffusion material (shown here with one of our MI-005 (Gel Gaskets).

Use each sheet separately or double them up for an extra soft light.

This is great for when the Novatron flash heads and Monolights produce an illumination that is a little too sharp for the effect that you are trying to create.

The diffusion material scatters the light in an even manner.

These durable vinyl sheets are moderately heat resistant. So, please carefully monitor them when used over extended periods of time with our higher wattage lamps.

UNIVERSAL SPEEDRING -1

$30.99

Universal Speedring allows softbox compatibility with most light systems without using proprietary mount

light mount must fit inside dimensions of ring opening.

HONEYCOMB GRID FOR 4001-A SNOOT

$26.99

Do you want to make the spot of light from our 4001-A1 Adjustable Snoot even tighter? The 4001-A1 is the solution. Our 4001-A1 Honeycomb Grid is a simple attachment for directing a narrower, more concentrated beam of light. The light may then have less spill onto other places on your set.

The 4001-A1 Honeycomb Grid attachment slips onto the front end of our 4001-A1 snoot.

SNOOT W/HONEYCOMB F/2103FC, M150, M300, M500

$39.95

Snoot gives pinpoint accurate directional light when used with Novatron Baretube monolights and flash heads.

Designed to fit Novatron M150, M300, M500 and 2103FC only.

Heavy Duty Bracket (Black)

$40.99

Novatron Heavy Duty Bracket (Black)

Heavy duty bracket for mounting equipment (with proper adapter) to a standard light stand. The bracket can tilt and receive an umbrella. The 4040 bracket is included with M300, M500 monolights and the 2103-FC flash head.

GEL AND DIFFUSION MATERIAL KIT

$50.99

The Novatron Color and Diffusion Gel Filter Set, & Gaskets (8×8″) includes one each of red, yellow, blue, and green gels. It also includes two sheets of diffusion material and two UV color correction filters. There is a pair of Gel Gaskets included as well. These are designed for holding gels in position for periods of time under intense heat. Gels and filters are 8 x 8″ (20.32 x 20.32 cm).

The starter kit includes color gel material in:
1-Red
1-Yellow
1-Blue
1-Green
2-Diffusion Sheets
2-UV Color Correction Filters

Also included in the kit is a pair of Gel Gaskets that are great for holding gels in position for periods of time, under intense heat.

Our Gel Gasket and the diffusion material  are available separately. Some Novatron users like to have one Gel Gasket for each sheet of material in their library. This keeps things organized.

Novatron 6 1/2 INCH STANDARD REFLECTOR

$54.99

Our new, highly polished, 2032 Reflector is 6.5″ in diameter. It disperses light in pattern of 70°, the same pattern of all Novatron’s flash heads that have built in reflectors.

Just like its predecessor, the new 2032 is secured to a lighting instrument with MI-014 knobs, but the new reflector permits an extremely tight fit for four knobs instead of two.

Our 2032 is included with the following products:
– 2103-FC Bare Tube Head
– M600 Monolight
– M500 Monolight
– M300 Monolight
– M150 Monolight
– CL Continuous Light

FINE HONEYCOMB GRID WITH GEL HOLDER

$77.50

The Novatron Fine Honeycomb Grid with Gel Holder is a simple attachment for creating a narrower beam of light. With an added Gel Holder attachment. Fits all flash heads and the 2032 6.5″ reflector that fits all of the current bare tube heads.

Our 4520 is a great way to contain light to a very specific area. The honeycomb grid is fine, for the tightest spot.

For a softer grid spot you’ll want the companion 4620.

It features a deep rear rim and snaps in place on the front rim of all Novaton’s 6.5″ reflectors. It fully covers the instrument’s reflector to avoid spill. It can be readjusted over the reflector, 360 degrees, for optimal use.

The 8″x 8″ channel holds any one of the filters found in the 4021 Gel and Diffusion Material Kit.

Use it with our flash heads that have built-in reflectors or on the 2032 reflector that fits all of our current bare tube heads, Monolight, and continuous lights.

COARSE HONEYCOMB GRID WITH GEL HOLDER

$77.50

Novatron 4620 COARSE HONEYCOMB GRID WITH GEL HOLDER

Attaches to all Novatron heads with reflectors except for the 2034 reflector (which is 16″ in diameter).
It functions by directing a narrower, softer, more collimated beam of light to the subject. The coarse honeycomb grid pattern is slightly larger than the 4520 grid and provides a slightly brighter and wider pattern.