Welcome to OmegaBrandess. Want to place an order? Give us a call: (410) 374-3250. Free shipping on most orders over $50

Shopping Cart

Showing 25–36 of 62 results

Sale

$90.25Add to cart

Z-Finder mMounting Frame for tall DSLR bodies

$90.25

The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure.. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off. This frame is used on the taller body cameras such as the Canon 1D Mark IV and Nikon D3s with 3″ screens.

$90.25Add to cart

Sale

$59.85Add to cart

Z-Finder Mounting Frame for Canon 5D

$59.85

The Z-Finder Mounting Frame is specific for the Canon 5D Mark II camera only. The Z-Finder Mounting frame that is included with the Z-Finder Pro is a Universal Frame and it will with the Canon 5D, Canon 7D, Canon T2i and more. However, if you want a frame where the red thumb screws on the gorilla plate will cover the entire frame than this is your frame.

$59.85Add to cart

Sale

$47.50Add to cart

Z-Finder Mounting Frame for small DSLR bodies

$47.50

The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off. This frame is used on the small body cameras with 3″ screens and no battery grips such as the Canon 5D Mark II, Canon 7D, Canon 550D, Canon 60D, Nikon D90, Nikon D300, D7000 and other cameras of the same size.

$47.50Add to cart

Sale

$114.00Add to cart

Z-Finder Mounting Frame for Small DSLR bodies with Battery Grips

$114.00

The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off.

This frame is used on the small body cameras with 3″ screens & battery grips such as the Canon 5D Mark II, Canon 7D, Nikon D90, Nikon D300, D7000 and other cameras of this size.

Please Note: This frame DOES NOT WORK with 3rd party battery grips.

$114.00Add to cart

Sale

$375.25Add to cart

Z-Finder Pro 2.5x for 3.2″ Screens

$375.25

THIS Z-FINDER WILL FIT THE CANON 5D MIII AND THE NIKON D800

The Z-Finder Pro 2.5x for 3.2″ screens is another one of Zacuto’s Optical Viewfinders that allows small bodied DSLR cameras with 3.2″ screens to have the correct form factor for video. It offers 2.5x focusable magnification (3x is available),a 40mm diameter Zacuto optical designed lens, an anti-fog coating protective cover, an eyecup preventing extraneous light leakage, a diopter and a field of view perfectly matched to 3 LCD screens. The diopter allows you to dial in the focus to match your eye. If you need extra focal point you can use the Z-Finder Extender Frames. The Z-Finder Pro 2.5x has a diopter range of -4.75 and up (unlimited with extender frames). These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro and extend the Z-Finder glass further way from the LCD screen for people who are farsighted.


The Z-Finder Pro uses our Gorilla Baseplate and Z-Finder mounting frame to mount to the camera. The Gorilla Baseplate attaches to the bottom of your camera using a ¼ 20 screw and the Z-Finder mounting frame attaches to the Gorilla Baseplate using thumb screws. The rubber back mounting frame does not attach to your LCD; it is held in place against your LCD with pressure. This method allows you to quickly remove the Z-Finder Pro by snapping it off the frame. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws and pulling up on the metal mounting frame to release it.

The Z-Finder Pro 2.5x for 3.2″ Screens includes:
– 3 Extender Frames
– Gorilla Plate with Z-Finder 3.2″ Mounting Frame for short bodied DSLR cameras (Canon 5D Mark III, Nikon D800)
– Lens Cap & Protective Boot
– Lanyard Hook and Lanyard
– Z-Finder Dust Cover
– 2.5x lens with an anti-fog coating protective cover
– extra anti-fog coating protective cover*


Please note:
1. If you already have a Z-Finder, you can purchase just the Z-Finder 3.2 Frame for small body cameras.

2. The anti-fog coating protective covers are expendable. They act as a protective cover to your lens so your lens does not get damaged and they also help prevent the fogging of the lens.

3. If you are using a battery grip on your small bodies DSLR camera with 3.2 screens, you will need a different frame that is not yet available. If you have a taller body camera with a 3.2 screen like the Canon 1Dx, you will need a 3.2 Tall Frame which is not yet available. These will be available around mid- June.

4. The Z-finder is a magnifier and as such will magnify the sun and could damage the LCD screen if the sun is allowed to shine directly through the Z-finder lens. This is not a defect but a physical property. Caution should be taken to avoid sun magnification.

5. The tapped holes on the bottom of the Gorilla plate are offset from the center of the lens. This is only a concern if you are using the Gorilla plate with other rigs that need the matte box in line with the lens/mounting screw hole.

$375.25Add to cart

Sale

$375.25Add to cart

Z-Finder Pro 3x for 3.2″ Screens

$375.25

THIS Z-FINDER WILL FIT THE CANON 5D MIII AND THE NIKON D800

The Z-Finder Pro 3x for 3.2″ screens is another one of Zacuto’s Optical Viewfinders that allows small bodied DSLR cameras with 3.2″ screens to have the correct form factor for video. It offers 3x focusable magnification (2.5x is available),a 40mm diameter Zacuto optical designed lens, an anti-fog coating protective cover, an eyecup preventing extraneous light leakage, a diopter and a field of view perfectly matched to 3 LCD screens. The diopter allows you to dial in the focus to match your eye. If you need extra focal point you can use the Z-Finder Extender Frames. The Z-Finder Pro 3x has a diopter range of -2.75 and up (unlimited with extender frames). These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro and extend the Z-Finder glass further way from the LCD screen for people who are farsighted.


The Z-Finder Pro uses our Gorilla Baseplate and Z-Finder mounting frame to mount to the camera. The Gorilla Baseplate attaches to the bottom of your camera using a ¼ 20 screw and the Z-Finder mounting frame attaches to the Gorilla Baseplate using thumb screws. The rubber back mounting frame does not attach to your LCD; it is held in place against your LCD with pressure. This method allows you to quickly remove the Z-Finder Pro by snapping it off the frame. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws and pulling up on the metal mounting frame to release it.

The Z-Finder Pro 3x for 3.2″ Screens includes:
– 3 Extender Frames
– Gorilla Plate with Z-Finder 3.2″ Mounting Frame for short bodied DSLR cameras (Canon 5D Mark III, Nikon D800)
– Lens Cap & Protective Boot
– Lanyard Hook and Lanyard
– Z-Finder Dust Cover
– 3x lens with an anti-fog coating protective cover
– extra anti-fog coating protective cover*


Please note:
1. If you already have a Z-Finder, you can purchase just the Z-Finder 3.2 Frame for small body cameras.

2. The anti-fog coating protective covers are expendable. They act as a protective cover to your lens so your lens does not get damaged and they also help prevent the fogging of the lens.

3. If you are using a battery grip on your small bodies DSLR camera with 3.2 screens, you will need a different frame that is not yet available. If you have a taller body camera with a 3.2 screen like the Canon 1Dx, you will need a 3.2 Tall Frame which is not yet available. These will be available around mid- June.

4. The Z-finder is a magnifier and as such will magnify the sun and could damage the LCD screen if the sun is allowed to shine directly through the Z-finder lens. This is not a defect but a physical property. Caution should be taken to avoid sun magnification.

5. The tapped holes on the bottom of the Gorilla plate are offset from the center of the lens. This is only a concern if you are using the Gorilla plate with other rigs that need the matte box in line with the lens/mounting screw hole.

$375.25Add to cart

Sale

$175.75Add to cart

Z-Lite Counterweight

$175.75

The Z-lite is a (just under) 3.5 lb. counterbalance weight to balance camera packages that are slightly front heavy. It slides onto 15mm rods, either both rods or on one rod. The Z-Lite is stainless steel with rubber o-rings to prevent hard contacts. A built in lever makes for easy mounting and removal. The Z-lite is great for DSLR packages.

$175.75Add to cart

$12.00Add to cart

ZACUTO 1/4 20″ DSLR SCREW IS A REPLACEMENT SCREW FOR DSLR BASEPLATE AND GORILLA PLATE

$12.00

Replacement 1/4 20″ screw for the following items:

DSLR Baseplate
Gorilla Plate

This screw is NOT a replacement screw for the Gorilla Plate Adapter.

$12.00Add to cart

Sale

$346.75Add to cart

ZFinder for C100

$346.75
Quick View

ZFinder for C100

$346.75

The C100 Z-Finder Pro is an optical viewfinder, specifically designed to attach to the Canon C100 cinema camera LCD. This Z-Finder will magnify the LCD screen by 1.8x and has a diopter for specific focus tuning. It cuts out any extraneous light and offers an initial point of stability by pressing your eye against the large eyecup. The C100 Z-finder Pro comes with a 40mm diameter Zacuto optical lens, anti-fog coated protective covers, and all necessary additional accessories for the Canon C100. The diopter allows you to dial in the focus to match your eye. If you need extra focal points you can use the included Z-Finder Extender Frames. These are semi-permanent stackable frames that attach to the body of the Z-Finder Pro and extend the Z-Finder glass further away from the LCD screen for people who are farsighted.

 The C100 Z-Finder Pro is comprised of three important parts. The first is the viewfinder itself with the lens, diopter, and eyecup. The second is the mounting system. The mount slides onto the Canon C100 LCD screen when articulated. The viewfinder snaps on and off the frame and can hang around your neck on the included lanyard when not in use. The third part is a set of Z-Bands that attach to your camera via a screw hole on the film panel included on the left side of the camera and then clip into two ball sockets on the Z-Finder itself. These Z-Bands add tension and support to the mount so the LCD screen and viewfinder can be set at any angle. Without the use of the Z-Bands, the hinge on the LCD screen cannot support the viewfinder (in any tilted up positions).

 The C100 Z-Finder Pro is specifically designed for the Canon C100 camera and is not compatible with any other cameras or alternate set ups. The C100 Z-Finder Pro is designed for use with the standard battery included with the Canon C100 camera. (Canon – BP-955 Lithium-Ion Battery Pack-5200mAh) There may not be clearance for larger batteries.

$346.75Add to cart

Sale

$251.75Add to cart

ZipGear Lens Kit (4) .8 pitch gears, fits all lenses

$251.75

Zacuto Universal ZipGear prime lens kit includes four 13.5″ adjustable gears and four gear locking housings. This kit is perfect for four prime lenses. Just wrap the gear around the lens, cut to size, press on gear locking housing and tighten. Installation takes one minute.

$251.75Add to cart

Sale

$64.59Add to cart

ZipGear Universal (fits any lens) (1) 13.5″ .8 pitch gear, fits all lenses

$64.59

Zacuto Universal ZipGear (any lens), 1 13.5-inch adjustable gear. Works on any camera, prime or zoom lens. Kit comes with 13.5″ plastic gear and black gear locking housing. Just wrap the gear around the lens, cut to size, press on gear locking housing and tighten. Installation takes one minute.

All zipgears are a .8 pitch.

$64.59Add to cart

Newsletter