The 1/4 20″ Lens Support uses a 1/4 20″ screw to screw directly into a variety of lenses for more support. This lens support clamps to the rods from underneath so it can quickly be taken off the rods. The middle rod that attaches to the lens has vertical adjustment, if needed (please select the rod size below). Only thumb screw tightening is necessary, no tools required. This lens support can be used with a variety of rod sizes. Please select the rods that are being used below for the q-mount.
1/4 20″ Lens Support Includes:
Rod (please select the size of rod needed)
1/2″ to 1/4 20″ adapter
Q-Mount Lightweight (if a different size Q-Mount is needed, please call)
Zacuto’s Z-Focus 3D Dry Erase Operator’s Marking Disc is a new 3D marking disc that allows the camera operator to see focus marks while operating the camera. This disc is magnetic and dry erase. This disc fits on all Zacuto follow focuses.
The anti-fog protective covers offer anti-fog and protection for your Z-Finder Pro and V2 lens. These covers are expendable* as customers may lose, scratch or damage these covers over time. They are meant to give you anti-fog and to help protect the actual lens on the Z-Finder. If your Z-Finder Pro and V2 did not ship with the anti-fog protective covers then you will need the Anti-Fog Protective Cover Upgrade Kit (pack of 3 with lens cap and eyecup) in order for them to work as the lens cap is slightly different than the one you have now.
The anti-fog protective cover upgrade kit includes a pack of 3 anti-fog protective covers, a lens cap, and an eyecup. The anti-fog protective covers offer anti-fog and protection for your Z-Finder Pro and V2 lens. These covers are expendable* as customers may lose, scratch or damage these covers over time. If your Z-Finder Pro and V2 did not ship with the anti-fog protective covers then you will need this upgrade kit in order for them to work as the lens cap is slightly different than the one you have now.
Your Zacuto DSLR Base Plate is a highly configurable base plate which is adjustable to accommodate tall and short body cameras and cameras with battery grips. It also has mounting points to attach just about anything. It comes with 2 black 3.5″ rods.
The DSLR Base Plate can accommodate 15mm rods on all 4 sides. On the front are 2 levels for rods. The top is for mounting follow focuses, matte boxes, zoom/focus motors and lens support if space allows. The bottom rods are primarily used for lens support and single or double hand grips. These rods can be locked via allen screw so as to not come loose if using only one side for a single hand grip. The rear rod holes are for rod extensions to support battery power, wireless plates, monitors and numerous other accessories that you may need when in a tripod configuration. The rod holes on the left and right sides are for mounting the gunstock and the offset shoulder pad and counterweight for hand held use. Also mounted on these side rods can be a top handle, monitor arms and the cage which would use both sides at the same time.
On the bottom of the DSLR Base plate are your standard ¼ 20 and 3/8 16 mounting holes for tripods, mono pods, steadicams, etc. The top plate is a quick release plate that with a twist of the red knob lifts straight up and off separating your DSLR with the Z-finder attached, from the rest of your rig. The red knob also gives you left/right movement to adjust the lens position. On the front of the base plate between the rods are 2 allen screws that are used to adjust the top plate vertically. The vertical adjustment is to adjust for different camera body sizes and maintain the proper lens height.