Similar characteristics to Tough Frost, but less dense. Tough, heat resistant base. (Transmission not available).
A reinforced, woven diffusion material. Similar properties to Grid Cloth (#3030), but quiet when used outdoors in windy conditions. Can be sewn and grommetted.
A relatively dense diffuser that creates an even field of soft, “shadowless” light. Excellent for combining multiple lights into a single, large area source. (Transmission not available).
Converts U.S. Cool White or Daylight type fluorescent lamps to 3200K photographic tungsten and removes the excess green. Available in rolls, sheets or sleeves. Deep-dyed base. (Transmission = 3%). (FStop: -1.5s)
Mired Shift N/A Reduces incident light by one stop. Extra-wide 60 in. Optically clear. (Transmission = 50%). (FStop: -1.0s)
Mired Shift N/A Reduces incident light level by two stops. Extra-wide 60 in. Optically clear (Transmission = 25%). (FStop: -2.0s)
Mired Shift N/A Reduces incident light level by three stops. Extra-wide 60 in. Optically clear. (Transmission = 12%). (FStop: -3.0s)
Mired Shift +81 Converts 5500K daylight to 3800K. Used when partial correction is desired or when daylight is below 4500K. Optically clear. (Transmission = 73%). (FStop: -0.5s)
Mired Shift +167 Converts 5500K daylight to 2900K. Preferred either for a warmer look or when daylight is over 6000K. Optically clear. (Transmission = 47%). (FStop: -1.1s)
Mired Shift -131 Standard Tungsten to Daylight dorrection. For converting 3200K sources to normal daylight. Deep-dyed base. (Transmission = 36%). (FStop: -1.5s)
Virtually weightless reflector material that conforms to any shape. Useful to reflect light in tight spaces. Can be crumpled for a softer effect. Reversible silver or gold.
Rosco Chroma Key Paints have been formulated with the assistance of video technicians throughout the country. They are manufactured to provide the high luminance values and color saturation for keying effects.
BINDER TYPE: Vinyl Acrylic.
DILUTION: Use straight out of the can. If necessary, dilute with water. Diluting Chroma Key paints may make coverage less even.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin, even, uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Appx 300 sq. ft. per gallon.
AVG. DRY TIME: AT 75°F (24°C) Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.