18 X 24 3-18 Watt 5000k Oak Porta-Trace
“Light Box is framed in 5/8″” thick hard Oak with a thick plexi-glass top. Features bright, even lighting. “
$810.99
In stock
Related Products
EKTACOLOR RA Bleach-Fix and Replenisher NR / Part B To make 208 gal
EKTACOLOR RA Bleach-Fix and Replenisher NR / Part B To make 208 gal
VACUUM PRESS 5298H
The Seal 5298H Vacuum Dry Mount Press is another leap forward for the Seal/Bienfang company. As the leading company for photo finishing and mounting, Seal has produced a dry mount press that also pre-dries your board, thereby saving time. This press can handle big jobs and handles multiple pieces at the same time.
Bienfang Vacuum Presses are designed to automatically control the four main variables of mounting: moisture, pressure temperature and time. This assures consistent results. There are two simple ways to operate the Vacuum Press: by setting each control individually or by using convenient programmed settings. Some settings are preset at the factory but you can also set your own programs for procedures you conduct repeatedly.
Platen temperature is maintained at +/- 2° F of the set temperature. Manufacturer’s warranty covers on-site service only.
KODAK PICTURE KIOSK RAPID PRINT SCANNER
Use KODAK Rapid Print Scanner to quickly scan and save your most cherished photos. It’s easy!
- Bring up to 200 photo prints to the store.
- Load and scan up to 20 photos at a time.
- The scanner’s de-skewing feature will automatically straighten crooked or upside prints.
- Your pictures are turned into digital images and stored onto a KODAK Picture CD.
- Keeps pictures safe for generations
COMMERCIAL 250 PRESS INTERNATIONAL 230V
The Seal 250 Commercial Dry Mount Press is a table-top, heat-activated dry mounting system. It utilizes uniform heat and pressure to mount, laminate, and texturize prints on substrates up to 1″ thick. It comes with direct temperature readout for precise control. Manufacturer’s warranty covers on-site service only.
Note: This item is ONLY wired for 230V, European voltage.
- Fast Operation
- Superior heating system quickly brings the platen to uniform temperature ensuring 100% bonding.
- Extended Temperature Range
- Thermostat control adjusts from 100-300°F (38-150°C) to cover a wide range of operating temperatures.
- Programmed Heating Cycles
- Temperature and time may be set by stored programs in control unit.
- Temperature Readout
- Platen temperature is indicated on LED display on top of unit.
- Cycle Time Readout
- Remaining time in the cycle is displayed.
- Oversize Capacity
- Design allows processing of materials larger than the press platen by sliding the work side-to-side or out of the front or back of the press.
- Extra-Wide Opening
- Opens a full 9″ (23 cm) for 550 and 10″ (25 cm) for 250 to provide easy access to platen surface
- Easy Pressure Adjustment
- Pressure adjusts and locks in seconds to accept materials up to 1″ (25mm) thick.
- Non-Stick Surface
- Platen surface is specially coated to help keep adhesives from sticking.
- Free-Floating Platen
- Seats evenly on the work without shifting to provide uniform pressure across the entire surface
- Rugged Construction
- Steel cantilevers increase durability and allow maximum pressure on work within the press; metal top and base construction adds ruggedness.
670 VCCE Dichroic Auto Variable Contrast
Dichroic Enlarger for All Popular B&W Variable Contrast PapersThe specially designed VCCE system incorporates a unique, dual-range design that provides two separate filtration channels covering all popular variable contrast papers. As filtration is changed, the enlarger automatically introduces the correct amount of neutral density to maintain constant exposure throughout the range of paper grades. This is achieved with state-of-the-art, dichroic cut-off filters which selectively pass certain wavelengths while rejecting others, resulting in a spectrally pure beam of light. The 670VCCE features the same chassis and baseboard as the popular Saunders/LPL 670MXL dichroic and 670CXL triple-condenser enlargers. What's more, the 670VCCE can be purchased as a complete enlarger or lamphouse only, for use on an existing 670-series chassis. Lamphouses are completely interchangeable, without tools. Simply Dial In Filtration – The Enlarger Compensates to Maintain Constant Exposure!The heart of the 670VCCE is its revolutionary lamphouse. Two independent filtration channels allow use of all popular contrast papers: Channel “1” is calibrated for Kodak Polycontrast III, Kodak Polymax and other equivalent variable contrast papers.Channel “2” is calibrated for use with Ilford Multigrade III RC papers, or compatible papers such as Agfa and Oriental.A convenient slide-switch makes channel selection quick and easy. Once the appropriate channel has been chosen, you simply dial in the desired paper grade. Paper grade readout displays are illuminated, stepless and marked in half-grade increments: Channel one displays filtration settings from -1 to 6, Channel Two displays filtration settings from 00 to 5. The unused channel readout is automatically masked to prevent the possibility of error.
