Related Products
1650 Case with Trek Pak Divider System 016500-0050-110
- RETRACTABLE EXTENSION HANDLE
- 4 STRONG POLYURETHANE WHEELS WITH STAINLESS STEEL BEARINGS
- Easy open Double Throw latches
- Open cell core with solid wall design – strong, light weight
- O-ring seal
- Automatic Pressure Equalization Valve
- Fold down handles
- Stainless steel hardware and padlock protectors
- 2 level Pick N Pluck™ with convoluted lid foam
- Lifetime Guarantee of Excellence
- WATERTIGHT, CRUSHPROOF, AND DUSTPROOF
INTERIOR (L x W x D)
28.57″ X 17.52″ X 10.65″ (72.5 X 44.5 X 27 CM)
EXTERIOR (L x W x D)
31.59″ X 20.47″ X 12.45″ (80.2 X 52 X 31.6 CM)
BODY: POLYPROPYLENE
FOAM: 1.3 LB POLYURETHANE
LATCH: ABS
PURGE BODY: ABS
LID O-RING: POLYMER
PURGE VENT: 3 MICRON HYDROPHOBIC NON-WOVEN PET
PINS: STAINLESS STEEL
PURGE O-RING: 70 SHORE NITRILE
The Ultimate Divider System for the Ultimate Case.
CLEAN AND STRONG
The TrekPak™ system uses pre-installed wall sections, divider panels, locking pins and a fool-proof cutting tool. Just lay your gear in the case, measure and cut the divider sections and lock them in place with the steel U-pins. We include extra divider material so you can change your mind, plus divider panels are also available separately so you can reconfigure your dividers anytime.
The results are impressive. The divider sections are manufactured from waterproof, closed cell foam that is laminated to a rigid corrugated
plastic panel. Light, strong and almost impossible to tear or shred, these panels will keep your gear safe for years.
THE CUTTING EDGE
Trimming the dividers to length is a snap. TrekPak’s exclusive double blade tool has a center guide that tracks in the corrugated center. Just place the tool in any hole and pull. The blades follow the slot for a perfectly straight cut every time.
THE NEW SPACE RACE
You’ll be amazed at how much more gear you can get into your new case. At just 7/16” thick, these rigid panels form a precise grid of protection without wasting any space.
Together with the included 1” bottom foam and convoluted lid foam, the TrekPak™ system forms a 360-degree cocoon inside your Pelican case
iM2750 Storm Case with Padded Dividers and Utility Organizer – Olive Drab
- Four Press & Pull Latches
- Three Double-layered, Soft-grip Handles
- Two Padlockable Hasps
- In-line Wheels
- Telescoping Handle
- Vortex® Valve
- Flush Powerful Hinges
- Lightweight Strong HPX® Resin
- Watertight
- Guaranteed For Life
INTERIOR (L x W x D)
22″ x 17″ x 12.7″ (55.9 x 43.2 x 32.2 cm)
EXTERIOR (L x W x D)
24.6″ x 19.7″ x 14.4″ (62.5 x 50 x 36.6 cm)
BODY: Injection Molded HPX® high performance resin
FOAM: 1.6pcf polyester
LATCH: Valox – PBT polybutylene terephthalate
PURGE BODY: Valox – PBT polybutylene terephthalate
LID O-RING: Silicone Sponge
PURGE VENT: Gortex membrane
PINS: Stainless Steel or Aluminum
PURGE O-RING: Buna-N , 50-60 Durometer Shore A
0550 Transport Case – Black (OVERSIZE)
- OVER 11 CUBIC FEET OF STORAGE SPACE
- FIT SIX 0550 CASES PER 463L MILITARY PALLET, 18 WHEN STACKED!
- Four extra-deep base-to-lid locking cleats ensure maximum stacking stability
- Optional Pallet Riser Kit
- Optional Caster Wheel Kit complete with brakes
- Easy open Double Throw latches
- Open cell core with solid wall design – strong, light weight
- Reinforced honeycomb deck and lid for added strength
- O-ring seal for dust and water resistant seal (IP55)
- Dual Integrated Automatic Pressure Equalization Valves
- Double wide grip fold down handles – makes lifting easy
- Lifetime Guarantee of Excellence
- Stainless steel hardware and padlock protectors
- Locking metal Lidstays keep lid locked in open position
- Store documents outside the case with our Document Container
- BUILT TO MOVE: BY FORKLIFT, BY WHEEL OR BY HAND
With over 11 cubic feet of space, you can store, protect, and move large loads in seconds. The reinforced honeycomb deck and lid construction provide support for heavy equipment, or multiple stacking on a 463L pallet. Opening the case at any altitude is not a problem- the dual integrated automatic pressure equalization valves keep moisture out and prevent vacuum lock, and the double wide grip makes lifting easy. With an IP55 certification, the 0550 Transport Case will protect your gear against rain and dirt. The 0550 Transport Case: Built to move-by forklift, by wheel, by hand.
INTERIOR (L x W x D)
47.57″ x 24.07″ x 17.68″ (120.8 x 61.1 x 44.9 cm)
EXTERIOR (L x W x D)
51.05″ x 27.54″ x 22.79″ (129.6 x 69.9 x 57.9 cm)
BODY: Polypropylene
LATCH: ABS
PURGE BODY: ABS
LID O-RING: Polymer
PURGE VENT: 3 Micron Hydrophobic Non-Woven PET
PINS: Stainless Steel
PURGE O-RING: 70 Shore Nitrile
0350 20″ Cube Case with Dividers – Black
- LARGE 2-PERSON FOLD DOWN HANDLES
- Stainless steel hardware and padlock protectors
- 3 level Pick N Pluck™ with convoluted lid foam
- Lifetime Guarantee of Excellence
- WATERTIGHT, CRUSHPROOF, AND DUSTPROOF
- Open cell core with solid wall design – strong, light weight
- Automatic Pressure Equalization Valve
- O-ring seal
INTERIOR (L x W x D)
20″ x 20″ x 20″ (50.8 x 50.8 x 50.8 cm)
EXTERIOR (L x W x D)
22.5″ x 22.43″ x 21.25″ (57.1 x 56.9 x 54 cm)
BODY: POLYPROPYLENE
FOAM: 1.3 LB POLYURETHANE
LATCH: ABS
PURGE BODY: ABS
LID O-RING: POLYMER
PURGE VENT: 3 MICRON HYDROPHOBIC NON-WOVEN PET
PINS: STAINLESS STEEL
PURGE O-RING: 70 SHORE NITRILE
COLORS
1650 CASE Black with yellow/black padded dividers 016500-0040-110
Pelican 1650 WATERPROOF CASE Black with yellow/black padded dividers
- Unbreakable, Watertight, Hard Case
- Ultra-high Impact Structural Copolymer
- Padded Tub with Dividers Included
- Built-in Automatic Purge Valve
- Watertight to 30′
- Oversized Folding Handle
- Top Handle
- Retractable Extension Handle
- Built-in Wheels
- The black Pelican 1654 Waterproof 1650 Case with Yellow and Black Divider Set
is an unbreakable, watertight, airtight, dustproof, chemical resistant
and corrosion proof hard case used to carry any kind of equipment that
needs to be protected from the elements. It is made of Ultra-high Impact
structural copolymer that makes it extremely strong and durable. It has
a 0.25″ (6.4 mm) neoprene O-ring, ABS latches that seal perfectly and
includes an automatic purge valve for quick equalization after changes
in atmospheric pressure.
-
The 1654 comes with a top handle,
oversized side handle, a retractable extension handle and strong
polyurethane wheels with stainless steel bearings. It has an effortless
release latch for the extension handle. The padlock protectors provide
added strength and extra security against cutting and theft.
A
divider kit with a full sewn tub with felt exterior, and a padded,
touch-fastening, divider set is included. Elastic hold-down straps help
secure gear. The dividers feature a hi-visibility yellow Nylex covering.
- Construction
-
- Ultra-high Impact structural copolymer
- Watertight, crushproof, and dust proof
- Open-cell core with solid wall design
- 24-piece divider set interior
- Easy open double throw latches
- Stainless steel padlock protectors
- O-ring seal
- Automatic pressure equalization valve
- Stainless steel hardware
- Temperature rating -10 to +210°F (-23 to +99°C)
24-piece
padded divider set consisting of; 1 tray, 1 long (16.5″), 2 (10.5″), 2
(9.75″), 9 (5.0″), 8 (3.5″) padded and flexible dividers and 1
convoluted lid foam section
