ALB-SB premium standard size album for S-Series and Print pages
- ALB-SB premium standard size album for S-Series and Print pages
- 11?2” silver D-ring
- Unpadded black buckram texture covering
- Black interior for hight impact presentations
- Matching protective slipcases available
Dimensions: 11″W x 117?8“H x 25?8“D
Capacity: (11/2″ D-ring) 75 negative preservers, 50 print preservers, 25 slide preservers, and 15 CD preservers.
EZ Plus Kit- 1.15 ml Sensor Clean + 5 Swabs 1.0 with sensor brush
The baLens is a snap-on lens cap with a removable translucent dome in the center. By simply placing the cap on your lens, pointing the camera at the light source and doing a manual white balance, superior color correction is easily achieved under any lighting conditions. Simple. Smart. Functional. Change the way your camera sees color. Go from orange, blue and green-tinted photos to beautifully captured color by setting a custom white balance with the baLens Cap. The patent-pending baLens White Balance Lens Cap system comes with interchangeable neutral and warm filters. So no matter how challenging the lighting, with a baLens Cap you can get better colors right out of the bag. Save time, energy and money by eliminating the need to adjust an image’s color balance in your photo editing software. baLens allows you to concentrate on the creative aspects of your photography. The baLens is simple to use: mount the baLens Lens Cap on the lens, take a reference exposure of the light falling on your intended subject with the camera set in manual focus/auto exposure mode. The baLens Lens Cap will allow the setting of a custom white balance based on the actual color temperature of the light source. The dome-shaped filter allows for very accurate measurement of color temperature under mixed light source conditions. Using the camera’s menu functions, locate the custom white balance setting and apply the reading. A warm dome is included for when you wish to achieve natural skin tones in portraits or an overall warmer effect in your photos. BRNO implements very strict quality controls. For example, once the formula for the center filter pieces are mixed, a pre-production sample is taken and measured against a control sample on a photo spectrometer and densitometer. Once this is approved, then samples are taken from production pieces during various times during output and retested, providing you a product that meets the highest of standards.
- Magnetic mount, with 50 lb. straight pull, securely attaches to magnetic surfaces.
- Positions device at any angle.
- Fits any device with a 1/4-20 tripod socket.
- Injection-molded, glass-reinforced nylon thermoplastic resin clamp
head and knob with aluminum threaded components allow years of use.
- Includes optional sticker for base of magnet to minimize the potential to scratch or damage surfaces.
- Ideal for use with small cameras, camcorders, optic scopes, etc.
- Made in the USA.
The Magnetic UltraMount™ is a
portable magnetic mount that supports small cameras, camcorders, optic
scopes, and other devices with a 1/4-20 thread. The ball mount has a
simple, one-adjustment knob for quick and accurate multi-directional
control so that the camera can be positioned at almost any angle. With a
magnetic straight pull of 50 lbs. devices are securely attached to
magnetic surfaces such as railings, cars, cabinets, etc. This product is
not recommended for use with SLRs or other heavy devices.
Always test the magnetic surface with the Magnetic UltraMount™ prior to
attaching a camera or other digital device to make sure it is securely
attached, as the pull strength of the magnet may vary depending on the
surface it is attached to. Be cautious when removing the Magnetic
UltraMount™ as the magnetic surface may scratch, remove or damage
painted surfaces or other finishes. The Magnetic UltraMount™ is not
suitable for SLR cameras or cameras using telephoto lenses. The Magnetic
UltraMount™ should be used in accordance with all product instructions
and warnings. Do not spray the product with WD-40 or other aerosol
products, as these contain solvents that can damage or weaken the
product or its magnetic surface. Please note that ceramic magnets like
the Magnetic UltraMount™ are brittle and may break if dropped or
mishandled. In ordinary usage in accordance with the manufacturer’s
instructions and warnings, this magnet should not damage your computer
tablet or smartphone. However, do not place the product near
magnetically sensitive objects such as credit cards, pacemakers,
defibrillators, computer hard drives or other magnetic storage media,
and certain electronic devices. Industrial Revolution assumes no
liability for personal injury or property damage resulting from use of
the product near objects sensitive to magnets. Magnetic objects like the
Magnetic UltraMount™ can pose a serious pinch hazard due to the
attractive force between the product and the object to which it is being
attached, so use caution in handling the product.
- Dimensions: 2 3/8″ x 2 3/8″ x 3 5/8″ (6cm x 6cm x 9cm)
- Weight: 5.9 oz. (168 g)
EZ Plus Kit- 1.15 ml Sensor Clean + 5 Swabs 1.3 with sensor brush