CINEGEL DIFFUSION FILTER -LIGHT TOUGH FROST- 48X25FT ROLL (OVERSIZE)
Similar characteristics to Tough Frost, but less dense. Tough, heat resistant base. (Transmission not available).
$235.00
Available on backorder
Related Products
ROSCOLUX DIFFUSION FILTER – FROST – 24″ X 25′ ROLL
Frost. Changes ellipsoidal to fresnel beam pattern.
Plug in Flash Tube for (2103-FC Bare Tube )
The Novatron F0008 is a custom manufactured plug-in flash tube used in the N2103-FC flashhead. The lamp is color corrected and rated 1000 watt – seconds.
1000 Watt Constant light w/2 500w bulbs, reflector and safety screen
These rugged, US manufactured products, are versatile and a manageable light source for those looking for an affordable way to light photo and video subjects with dependability. The NCL04250 unit ships with two 250 watt frosted halogen lamps and the NCL04500 ships with two 500 watt frosted halogen lamps and each head is rated to 1000 watts. The CL04 delivers flexibility on demand, it’s individual lamp controls and fan-less power source make it great for video. The unit accepts an assortment of 1000 watt-rated light modifiers including soft boxes, providing the user with an almost endless ability to shape the unit's light output to their needs. The CL04 accepts nearly all of the Novatron light accessories. At last an affordable, versatile, all-around light for all your continuous light needs.
ROSCO CHROMA KEY PAINT – GREEN – 1 GALLON
Rosco Chroma Key Paints have been formulated with the assistance of video technicians throughout the country. They are manufactured to provide the high luminance values and color saturation for keying effects.
FINISH: Matte.
SOLVENT: Water.
BINDER TYPE: Vinyl Acrylic.
DILUTION: Use straight out of the can. If necessary, dilute with water. Diluting Chroma Key paints may make coverage less even.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin, even, uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Appx 300 sq. ft. per gallon.
AVG. DRY TIME: AT 75°F (24°C) Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
