Endura Metallic Paper F 40″ x 164′ Roll
KODAK PROFESSIONAL ENDURA Metallic VC Digital Paper features improved emulsion components as compared to our original-generation KODAK PROFESSIONAL ENDURA Metallic Paper.
Professionals who seek distinction for commercial and portrait output as a means to expand business have a new dimension to offer their clients. The glossy finish and metallic-looking appearance of this paper create images with exceptional visual interest and depth, which are sure to appeal to both photographers and display designers. Photographers have described the look as “chrome on paper.”
ENDURA Metallic VC Paper uses a proprietary combination of film laminate layers to produce three-dimensional, outstanding, lasting images on an ultra-bright background. Its professional emulsion set provides extreme sharpness, brightness, and color saturation with an intense black density that increases visual appeal. Try it for a wide range of applications – from portraits (sports, special events, youth and wedding) to commercial uses, such as print runs, press kits, photo décor, pop-up and display images.
$533.90
Related Products
HZEKTACOLOR RA Bleach-Fix and Replenisher NR / Bulk Pack All Parts make 20gal
Kodak Ektacolor RA Chemistry is used in the processing of color prints RA-4 process, developed in, tray, drum, or rotary tube developing.
Use this Bleach-Fix NR for continuous processors with high utilization, it features a low replenishment rate. (It is not recommended for use in roller transport processors.)
Be especially careful not to contaminate the developer with bleach-fix; even minute amounts of bleach-fix can severely contaminate the developer.
To prevent developer contamination, use a separate mixing container for the developer.
Chemicals are supplied as all-liquid concentrates for easy mixing and handling
HZ**–This item is a HazMat item any orders that include Hazmat Items will incur a $25.00 per box fee over and above the shipping stated.
TRP The Sink II 72″x32″x13″, Black – OVERSIZE (OVERSIZE)
**OVERSIZE**
State-of-the-Art, fully assembled, plumbed, and lab tested. One Year LTD Warranty on Water Controls. plus or minus1/2 degree G, 1-7 GPM Mixer. Check stop valves. Vacuum breaker. Dual scale 3″ thermometer with recalibration screw. 4 Ft. armored spray hose. Includes Thermostatic mixer manual. Stainless steel brackets. Three valves tempered and one untempered water outlets with 3/4″ GHT fittings. 100% plated brass fittings and stainless steel armored 1000 lb. test tubing. 72″ x 32″ x 13″
SCORPRION
The Scorpion rig is the ultimate solution to DSLR shoulder mounted shooting with an EVF. At the center of the Scorpion is our highly adjustable DSLR Baseplate, which allows you to mount any DSLR to the rig and mount your rig onto a tripod. The baseplate attaches to your tripod using the standard tripod plate screws; (2) 1/4 20 and (1) 3/8 16. You can also easily quick release your camera from the rig by turning the red knob on the side of the baseplate and pulling up on your camera. This unique feature allows you to quickly switch between using the camera on its own or as part of your rig.
Our new curved form-fitting silicone gel shoulder pad connects to the back of the baseplate via two 2 M/F rods. The rods screw into the back of the DSLR baseplate and connect to the front of the shoulder pad via 15mm quick release ports, making the switch from shoulder mount to tripod use quick and easy. The Scorpion Shoulder Assembly also features an innovative ball joint built into the front of the shoulder pad. This allows the entire shoulder pad assembly to articulate in multiple directions so shooters can angle it to fit their body for individual comfort. This should be done with one hand while the kit is on your shoulder. The ball joint is released and secured by the red top lever.
The Scorpion can be used on your left or right shoulder. The Scorpion shoulder assembly also has a built in top handle for placing and removing it from your shoulder, low mode shooting and easy carrying. The handle can be positioned up or set down into the shoulder pad for storage with the turn of a Zacuto quick release lever.
The Scorpion kit is finished off with a 7lb Z-lite counterbalance and Zgrips V3 with 4.5 rods. With the shoulder pad and counterbalance weight coming directly off of the back of the baseplate, the rig is perfectly in-line with the camera and ready to be used with one of our EVFs or an on-board monitor for traditional ENG style shooting. You can mount your EVF or monitor to the side of the rig using the included EVF mount.
Scorpion Includes:
-DSLR Baseplate with (2) sets of 3.5″ M/F Rods
-Scorpion Shoulder Assembly
-Zgrips V3 with 4.5″ Rods
-Z-Lite Double
-EVF Scorpion Mount
MODEL RELEASE CARDS PACK OF 25 PRV LBL
Model release short form on handy 3″ x 5″ cards. Easy to carry on assignments. Just stick in your camera bag. Pack of 25.
VACUUM PRESS 5298H
The Seal 5298H Vacuum Dry Mount Press is another leap forward for the Seal/Bienfang company. As the leading company for photo finishing and mounting, Seal has produced a dry mount press that also pre-dries your board, thereby saving time. This press can handle big jobs and handles multiple pieces at the same time.
Bienfang Vacuum Presses are designed to automatically control the four main variables of mounting: moisture, pressure temperature and time. This assures consistent results. There are two simple ways to operate the Vacuum Press: by setting each control individually or by using convenient programmed settings. Some settings are preset at the factory but you can also set your own programs for procedures you conduct repeatedly.
Platen temperature is maintained at +/- 2° F of the set temperature. Manufacturer’s warranty covers on-site service only.
