Flip-Cage w/ Tripod Adapter – iPhone4/4S – Jade Green
Gary Fong is a lifelong photographer with a knack for innovative solutions in the lighting realm, but also dabbles with other inventions that solve photographers’ problems. The Flip Cage is such a product, and is a great travelling companion for most point and shoot cameras fitting the general “deck of cards” form factor.
The Flip Cage acts as a rollbar, but also allows you to carry your point and shoot around your neck like a regular SLR thanks to its strap eyelets and 3′ long included strap.
More importantly, though, the Flip Cage allows both horizontal and vertical compositions with adjustment for your tilt axis just as if you had a tabletop tripod. Weighing less than ¼ lb and adding little mass to your point and shoot, the Flip Cage is a strong candidate to come along for every vacation or evening out with friends.
Flip Cage can also do light duty as a macro shooting stand, thanks to its slot for the camera screw which allows some fore-and-aft distance adjustment with the camera facing the table and the ‘roll bars’ oriented as if the camera was shooting a normal vertical composition.
- Accommodates any camera with a tripod screw and maximum dimensions of 4.0 x 2.5 x 1.0″ (101 x 54 x 26mm) WxHxD
- “Bumpers” protect camera’s housing
- Allows horizontal or vertical compositions, each with tilt adjustment
- Doubles as a macro stand by using the vertical orientation and rotating the camera upon the tripod screw to face straight down to the table
- Includes matched 36″ neck strap
$32.35$29.95
| Weight | 4.4 lbs |
|---|
Related Products
TRP The Sink II, Black, 48″ x 33″ x 13″, (UPS/OS) (OVERSIZE)
State of the art, fully assembled, plumbed, and lab tested temperature regulated sink package. +/- 1/2 degree F 1-7 GPM, vacuum breaker, 4′ armored spray hose, ball valve shut-off. dual scale 3″ thermometer, stainless steel brackets, two valve tempered outlets, 100% chrome brass fittings, 1000 lb. test tubing. Features + 1/2 degree F 1-7 GPM Check stop valves Vacuum breaker 4′ armored spray hose with tempered water source and ball valve shut off Dual scale 3″ thermometer with recalibration screw Includes maintenance log & thermostatic mixer manual Stainless steel brackets Two valve tempered water outlets with 3/4″ GHT fittings, one behind sink for processor hookup. 100% solid copper, chromed brass fittings & armored 1000 lb. test tubing
VACUUM PRESS 5298H
The Seal 5298H Vacuum Dry Mount Press is another leap forward for the Seal/Bienfang company. As the leading company for photo finishing and mounting, Seal has produced a dry mount press that also pre-dries your board, thereby saving time. This press can handle big jobs and handles multiple pieces at the same time.
Bienfang Vacuum Presses are designed to automatically control the four main variables of mounting: moisture, pressure temperature and time. This assures consistent results. There are two simple ways to operate the Vacuum Press: by setting each control individually or by using convenient programmed settings. Some settings are preset at the factory but you can also set your own programs for procedures you conduct repeatedly.
Platen temperature is maintained at +/- 2° F of the set temperature. Manufacturer’s warranty covers on-site service only.
SCORPRION
The Scorpion rig is the ultimate solution to DSLR shoulder mounted shooting with an EVF. At the center of the Scorpion is our highly adjustable DSLR Baseplate, which allows you to mount any DSLR to the rig and mount your rig onto a tripod. The baseplate attaches to your tripod using the standard tripod plate screws; (2) 1/4 20 and (1) 3/8 16. You can also easily quick release your camera from the rig by turning the red knob on the side of the baseplate and pulling up on your camera. This unique feature allows you to quickly switch between using the camera on its own or as part of your rig.
Our new curved form-fitting silicone gel shoulder pad connects to the back of the baseplate via two 2 M/F rods. The rods screw into the back of the DSLR baseplate and connect to the front of the shoulder pad via 15mm quick release ports, making the switch from shoulder mount to tripod use quick and easy. The Scorpion Shoulder Assembly also features an innovative ball joint built into the front of the shoulder pad. This allows the entire shoulder pad assembly to articulate in multiple directions so shooters can angle it to fit their body for individual comfort. This should be done with one hand while the kit is on your shoulder. The ball joint is released and secured by the red top lever.
The Scorpion can be used on your left or right shoulder. The Scorpion shoulder assembly also has a built in top handle for placing and removing it from your shoulder, low mode shooting and easy carrying. The handle can be positioned up or set down into the shoulder pad for storage with the turn of a Zacuto quick release lever.
The Scorpion kit is finished off with a 7lb Z-lite counterbalance and Zgrips V3 with 4.5 rods. With the shoulder pad and counterbalance weight coming directly off of the back of the baseplate, the rig is perfectly in-line with the camera and ready to be used with one of our EVFs or an on-board monitor for traditional ENG style shooting. You can mount your EVF or monitor to the side of the rig using the included EVF mount.
Scorpion Includes:
-DSLR Baseplate with (2) sets of 3.5″ M/F Rods
-Scorpion Shoulder Assembly
-Zgrips V3 with 4.5″ Rods
-Z-Lite Double
-EVF Scorpion Mount
MODEL RELEASE CARDS PACK OF 25 PRV LBL
Model release short form on handy 3″ x 5″ cards. Easy to carry on assignments. Just stick in your camera bag. Pack of 25.
