Footrest – for Pneumatic Stool
Black die cast aluminum. Adjustable. Perfect for that relaxed pose. Fits Posing Stools #40703, #40720, and Prop Stand.
$95.95
| Weight | 6 lbs |
|---|
Related Products
Premium Large Format Guillotine Cutter – 43 in. with stand (OVERSIZE)
Dahle takes safety to a whole new level with it’s line of Premium Guillotines. Designed and engineered in Germany, these trimmers feature a revolutionary safety guard that rotates around the cutting blade to ensure complete protection. This guard protects your fingers from a ground blade made of German Solingen Steel. The blade sharpens itself with each and every cut so you’re guaranteed to maintain a perfectly honed edge. The automatic safety shield, along with the razor sharp blade it protects you from, makes the Dahle Premium Guillotine one of the safest, most capable trimmers ever developed. Dahle Premium Guillotines are commercial grade, high capacity paper cutters capable of trimming up to 35 sheets of paper at a time as well as mat board. The automatic paper clamp provides even pressure along the entire cutting surface and securely holds your work in place to prevent fanning.
WIDE FORMAT ANTI-STATIC IONIZING FILM CLEANER
The KSE-250i is the newest film cleaner from Kinetronics. The KSE-250i is designed to clean up to 10″ or 250mm wide. The KSE-250i has electronic ionization, four anti-static brushes and filtered air. The high-tech cleaner has six titanium emitters to create clouds of ions that dissipate static charges on film. Dust and debris are then smoothly whisked off the film, which insures crisp, sharp images and scans.
The KSE-250i is designed for use by digital labs, aerial photographers and fine art photographers. It has been engineered to be a tough “work horse” with a steel cabinet, state of the art low-voltage circuit design and a ball bearing fan. The machine operates on 12 volts DC and uses a universal power supply with input from 90 VAC to 240 VAC in either 50 or 60 Hz. For correct power cord please specify the country of use. The KSE-250i is sold with a one-year warranty.
SPECIFICATIONS
LENGTH: 14″ or 356mm
WIDTH: 4 1/4″ or 105mm
HEIGHT: 4 1/2″ or 114mm
WEIGHT: 5.3 lbs or 2.4 kg.
SHIPPING WEIGHT: 6 lbs. or 2.75 kg.
SCORPRION
The Scorpion rig is the ultimate solution to DSLR shoulder mounted shooting with an EVF. At the center of the Scorpion is our highly adjustable DSLR Baseplate, which allows you to mount any DSLR to the rig and mount your rig onto a tripod. The baseplate attaches to your tripod using the standard tripod plate screws; (2) 1/4 20 and (1) 3/8 16. You can also easily quick release your camera from the rig by turning the red knob on the side of the baseplate and pulling up on your camera. This unique feature allows you to quickly switch between using the camera on its own or as part of your rig.
Our new curved form-fitting silicone gel shoulder pad connects to the back of the baseplate via two 2 M/F rods. The rods screw into the back of the DSLR baseplate and connect to the front of the shoulder pad via 15mm quick release ports, making the switch from shoulder mount to tripod use quick and easy. The Scorpion Shoulder Assembly also features an innovative ball joint built into the front of the shoulder pad. This allows the entire shoulder pad assembly to articulate in multiple directions so shooters can angle it to fit their body for individual comfort. This should be done with one hand while the kit is on your shoulder. The ball joint is released and secured by the red top lever.
The Scorpion can be used on your left or right shoulder. The Scorpion shoulder assembly also has a built in top handle for placing and removing it from your shoulder, low mode shooting and easy carrying. The handle can be positioned up or set down into the shoulder pad for storage with the turn of a Zacuto quick release lever.
The Scorpion kit is finished off with a 7lb Z-lite counterbalance and Zgrips V3 with 4.5 rods. With the shoulder pad and counterbalance weight coming directly off of the back of the baseplate, the rig is perfectly in-line with the camera and ready to be used with one of our EVFs or an on-board monitor for traditional ENG style shooting. You can mount your EVF or monitor to the side of the rig using the included EVF mount.
Scorpion Includes:
-DSLR Baseplate with (2) sets of 3.5″ M/F Rods
-Scorpion Shoulder Assembly
-Zgrips V3 with 4.5″ Rods
-Z-Lite Double
-EVF Scorpion Mount
COMMERCIAL 210M – 115V
The Seal 210M Dry Mount Press is a table-top, heat-activated dry mounting system. It utilizes uniform heat and pressure to mount, laminate and texturize prints on substrates up to 1″ thick. Comes with a direct temperature readout for precise control. Manufacturer’s warranty covers on-site service only.
| Platen Size | 23 x 18.5″ / 58.4 x 47 cm |
| Maximum Thickness | 1″ / 2.5 cm |
| Temperature Range | 150 to 300°F / 65 to 149°C |
| Dimensions | W: 27 x D: 23 x H: 11 to 20″ / W: 66 x D: 58.4 x H: 27.9 to 50.8 cm |
550 MASTERPIECE PRESS 230 VOLT
For size, for ease of function, and for flexibility, there is not another mechanical press like it in the framing market today. Years of research into the specific needs of framing professionals has resulted in a mounting press that can be relied upon for artistic achievement whether your project involves black/white or full color photos, graphics, posters or other oversize artwork.
Ideal applications for the Masterpiece 550 Mechanical Press include creative dry mounting, laminating and applying texture to artwork of all shapes and sizes. Manufacturer’s warranty covers on-site service only.
- Easy to read digital display with touch pad
- Now twice as wide, a full 9″ opening makes it easier to use and clean
- Pre-set programs for Biengfang adhesives and laminates major applications
- User-set programs let you customize time and temperature
- Provides a working space of 24 x 36″
- Capable of finishing pieces larger than the press itself
- Accepts materials up to 1″ thick
- Extended temperature range thermostat control adjusts from 100-300° F (38-150° C) and improves regulation to with +/- 5° F
- Superior heating system quickly brings the platen to uniform temperature ensuring 100% bonding
- Platen surface is specially coated to keep adhesives from sticking
- Engineered to require minimum maintenance with durable framework and built-to-last construction
