FULL SPOT LENS (12″ X 12″) FOR LITEPAD
LitePad’s Full Spot Lens re-focuses all of the light shooting off the sides of LitePad back to the center. The result is a brighter, more focused light.
$89.00
Related Products
670 VCCE Dichroic Auto Variable Contrast
Dichroic Enlarger for All Popular B&W Variable Contrast PapersThe specially designed VCCE system incorporates a unique, dual-range design that provides two separate filtration channels covering all popular variable contrast papers. As filtration is changed, the enlarger automatically introduces the correct amount of neutral density to maintain constant exposure throughout the range of paper grades. This is achieved with state-of-the-art, dichroic cut-off filters which selectively pass certain wavelengths while rejecting others, resulting in a spectrally pure beam of light. The 670VCCE features the same chassis and baseboard as the popular Saunders/LPL 670MXL dichroic and 670CXL triple-condenser enlargers. What's more, the 670VCCE can be purchased as a complete enlarger or lamphouse only, for use on an existing 670-series chassis. Lamphouses are completely interchangeable, without tools. Simply Dial In Filtration – The Enlarger Compensates to Maintain Constant Exposure!The heart of the 670VCCE is its revolutionary lamphouse. Two independent filtration channels allow use of all popular contrast papers: Channel “1” is calibrated for Kodak Polycontrast III, Kodak Polymax and other equivalent variable contrast papers.Channel “2” is calibrated for use with Ilford Multigrade III RC papers, or compatible papers such as Agfa and Oriental.A convenient slide-switch makes channel selection quick and easy. Once the appropriate channel has been chosen, you simply dial in the desired paper grade. Paper grade readout displays are illuminated, stepless and marked in half-grade increments: Channel one displays filtration settings from -1 to 6, Channel Two displays filtration settings from 00 to 5. The unused channel readout is automatically masked to prevent the possibility of error.
COMMERCIAL 250 PRESS INTERNATIONAL 230V
The Seal 250 Commercial Dry Mount Press is a table-top, heat-activated dry mounting system. It utilizes uniform heat and pressure to mount, laminate, and texturize prints on substrates up to 1″ thick. It comes with direct temperature readout for precise control. Manufacturer’s warranty covers on-site service only.
Note: This item is ONLY wired for 230V, European voltage.
- Fast Operation
- Superior heating system quickly brings the platen to uniform temperature ensuring 100% bonding.
- Extended Temperature Range
- Thermostat control adjusts from 100-300°F (38-150°C) to cover a wide range of operating temperatures.
- Programmed Heating Cycles
- Temperature and time may be set by stored programs in control unit.
- Temperature Readout
- Platen temperature is indicated on LED display on top of unit.
- Cycle Time Readout
- Remaining time in the cycle is displayed.
- Oversize Capacity
- Design allows processing of materials larger than the press platen by sliding the work side-to-side or out of the front or back of the press.
- Extra-Wide Opening
- Opens a full 9″ (23 cm) for 550 and 10″ (25 cm) for 250 to provide easy access to platen surface
- Easy Pressure Adjustment
- Pressure adjusts and locks in seconds to accept materials up to 1″ (25mm) thick.
- Non-Stick Surface
- Platen surface is specially coated to help keep adhesives from sticking.
- Free-Floating Platen
- Seats evenly on the work without shifting to provide uniform pressure across the entire surface
- Rugged Construction
- Steel cantilevers increase durability and allow maximum pressure on work within the press; metal top and base construction adds ruggedness.
WIDE FORMAT ANTI-STATIC IONIZING FILM CLEANER
The KSE-250i is the newest film cleaner from Kinetronics. The KSE-250i is designed to clean up to 10″ or 250mm wide. The KSE-250i has electronic ionization, four anti-static brushes and filtered air. The high-tech cleaner has six titanium emitters to create clouds of ions that dissipate static charges on film. Dust and debris are then smoothly whisked off the film, which insures crisp, sharp images and scans.
The KSE-250i is designed for use by digital labs, aerial photographers and fine art photographers. It has been engineered to be a tough “work horse” with a steel cabinet, state of the art low-voltage circuit design and a ball bearing fan. The machine operates on 12 volts DC and uses a universal power supply with input from 90 VAC to 240 VAC in either 50 or 60 Hz. For correct power cord please specify the country of use. The KSE-250i is sold with a one-year warranty.
SPECIFICATIONS
LENGTH: 14″ or 356mm
WIDTH: 4 1/4″ or 105mm
HEIGHT: 4 1/2″ or 114mm
WEIGHT: 5.3 lbs or 2.4 kg.
SHIPPING WEIGHT: 6 lbs. or 2.75 kg.
EKTACOLOR RA Bleach-Fix and Replenisher NR / Part B To make 208 gal
EKTACOLOR RA Bleach-Fix and Replenisher NR / Part B To make 208 gal
Premium Large Format Guillotine Cutter – 43 in. with stand (OVERSIZE)
Dahle takes safety to a whole new level with it’s line of Premium Guillotines. Designed and engineered in Germany, these trimmers feature a revolutionary safety guard that rotates around the cutting blade to ensure complete protection. This guard protects your fingers from a ground blade made of German Solingen Steel. The blade sharpens itself with each and every cut so you’re guaranteed to maintain a perfectly honed edge. The automatic safety shield, along with the razor sharp blade it protects you from, makes the Dahle Premium Guillotine one of the safest, most capable trimmers ever developed. Dahle Premium Guillotines are commercial grade, high capacity paper cutters capable of trimming up to 35 sheets of paper at a time as well as mat board. The automatic paper clamp provides even pressure along the entire cutting surface and securely holds your work in place to prevent fanning.
