MICROFIBER “PANTHER CLOTH” LENS CLEANING CLOTH 8″X8″ IN VINYL POUCH
Kinetronics Microfiber Panther Cloth Lens Cleaning Cloth
$8.99
Related Products
STATICWISK BRUSH 2-1/2″ PLASTIC HANDLE
Fine quality anti-static lens brush. Made from a special blend of soft, natural hair and a conductive fiber. To use the brush, simply “sweep” the lens. The brush has a resistivity of 10-1 and will dissipate any static charge and “release” the dust.
STATICWISK BRUSH 1-1/4″ PLASTIC HANDLE BRUSH
Fine quality anti-static lens brush. Made from a special blend of soft, natural hair and a conductive fiber. To use the brush, simply “sweep” the lens. The brush has a resistivity of 10-1 and will dissipate any static charge and “release” the dust.
KINESTAT FOR UP TO 8X10
The KineStat is available for 120 and 4×5 film. The KineStat is built of solid steel. It removes static and dust easily with the Kinetronics StaticWisk brushes. These special brushes effectively neutralize static and whisk away dust. Two adjusting screws allow precise brush adjustments. Features a GC-12 grounding cord to provide additional grounding, especially important in long roll film applications. Installation is relatively simple. Each unit has been designed for mounting at any angle for best performance. Four holes in the base are provided for permanent mounting. Rubber feet are attached on each unit. A magnetic strip, foam tape or velcro may be used to mount the KineStat. Maintenance is simple and easy. The easiest way to keep your KineStat clean is to vacuum the brushes to remove built-up dust and dirt. Because the KineStat brushes are hand sewn with stainless steel wire, they can even be washed in shampoo and water. KineStat is one of the best investments you can make in your darkroom for top-notch professional prints.
WIDE FORMAT ANTI-STATIC IONIZING FILM CLEANER
The KSE-250i is the newest film cleaner from Kinetronics. The KSE-250i is designed to clean up to 10″ or 250mm wide. The KSE-250i has electronic ionization, four anti-static brushes and filtered air. The high-tech cleaner has six titanium emitters to create clouds of ions that dissipate static charges on film. Dust and debris are then smoothly whisked off the film, which insures crisp, sharp images and scans.
The KSE-250i is designed for use by digital labs, aerial photographers and fine art photographers. It has been engineered to be a tough “work horse” with a steel cabinet, state of the art low-voltage circuit design and a ball bearing fan. The machine operates on 12 volts DC and uses a universal power supply with input from 90 VAC to 240 VAC in either 50 or 60 Hz. For correct power cord please specify the country of use. The KSE-250i is sold with a one-year warranty.
SPECIFICATIONS
LENGTH: 14″ or 356mm
WIDTH: 4 1/4″ or 105mm
HEIGHT: 4 1/2″ or 114mm
WEIGHT: 5.3 lbs or 2.4 kg.
SHIPPING WEIGHT: 6 lbs. or 2.75 kg.
