Pick and Pluck Foam Sections Only (set of 3) for 1660
$198.50
Available on backorder
| Weight | 5 lbs |
|---|---|
| Dimensions | 28.2 × 19.66 × 17.63 in |
Related Products
RC 80QW ELITE WHEELED COOLER OD/TAN
80QT ELITE WHEELED COOLER – TAN
Pelican™ is proud to announce our bear resistant certification from the Interagency Grizzly Bear Committee.
The purpose of this certification is to help keep bears safe and significantly reduce bear-human encounters by ensuring that bears do not have access and become conditioned to anthropogenic foods and other bear attractants that increase these encounters.
This certification involves intense impact and penetration testing by use of visual inspection, mechanical methods and captive Grizzly Bear testing over extended periods of time.
Information relative to the IGBC testing and certification program can be viewed at www.IGBConline.org.
**Pelican™ Elite Coolers are certified bear-resistant by the IGBC under certification numbers 3365, 3366, 3373, 3374, 3375, 3376
- Up to 10 days ice retention, freezer grade gasket, 2″ polyurethane insulation
- Press & Pull Latches (Wide for Gloved Use)
- Molded-In Tie Downs
- Non-Skid & Non-Marking Raised Feet
- Molded-In Lock Hasp, Stainless Steel Plate
- Sloped Drain & Tethered Threaded Plug (Garden Hose Attachable)
- Corrosion Resistant Stainless Steel Hardware
- Integrated Fish Scale on Lid
- Made in USA
- Heavy duty wheels
- Molded-In handles with built in trolley handle
- Guaranteed for life
- Built-in Bottle Opener
- Built-in trolley handle with molded-in handles
iM3075 Storm Case with Padded Dividers and Utility Organizer – Black
Equipment not included.
- Seven Press & Pull Latches
- Four Double-layered, Soft-grip Handles
- Two Padlockable Hasps
- In-line Wheels
- Telescoping Handle
- Vortex® Valve
- Flush Powerful Hinges
- Lightweight Strong HPX® Resin
- Watertight
- Guaranteed For Life
INTERIOR (L x W x D)
29.8″ x 20.8″ x 17.8″ (75.7 x 52.8 x 45.2 cm)
EXTERIOR (L x W x D)
33.3″ x 24.4″ x 19.3″ (84.5 x 62 x 49 cm)
BODY: Injection Molded HPX® high performance resin
FOAM: 1.6pcf polyester
LATCH: Valox – PBT polybutylene terephthalate
PURGE BODY: Valox – PBT polybutylene terephthalate
LID O-RING: Silicone Sponge
PURGE VENT: Gortex membrane
PINS: Stainless Steel or Aluminum
PURGE O-RING: Buna-N , 50-60 Durometer Shore A
iM2750 Storm Case with Padded Dividers – Gray
Image displays black case but actual color of product will be as listed.
- Four Press & Pull Latches
- Three Double-layered, Soft-grip Handles
- Two Padlockable Hasps
- In-line Wheels
- Telescoping Handle
- Vortex® Valve
- Flush Powerful Hinges
- Lightweight Strong HPX® Resin
- Watertight
- Guaranteed For Life
INTERIOR (L x W x D)
22″ x 17″ x 12.7″ (55.9 x 43.2 x 32.2 cm)
EXTERIOR (L x W x D)
24.6″ x 19.7″ x 14.4″ (62.5 x 50 x 36.6 cm)
BODY: INJECTION MOLDED HPX® HIGH PERFORMANCE RESIN
FOAM: 1.6PCF POLYESTER
LATCH: VALOX – PBT POLYBUTYLENE TEREPHTHALATE
PURGE BODY: VALOX – PBT POLYBUTYLENE TEREPHTHALATE
LID O-RING: SILICONE SPONGE
PURGE VENT: GORTEX MEMBRANE
PINS: STAINLESS STEEL OR ALUMINUM
PURGE O-RING: BUNA-N , 50-60 DUROMETER SHORE A
iM3075 Storm Case with Utility Organizer – Olive Drab
- Seven Press & Pull Latches
- Four Double-layered, Soft-grip Handles
- Two Padlockable Hasps
- In-line Wheels
- Telescoping Handle
- Vortex® Valve
- Flush Powerful Hinges
- Lightweight Strong HPX® Resin
- Watertight
- Guaranteed For Life
INTERIOR (L x W x D)
29.8″ x 20.8″ x 17.8″ (75.7 x 52.8 x 45.2 cm)
EXTERIOR (L x W x D)
33.3″ x 24.4″ x 19.3″ (84.5 x 62 x 49 cm)
BODY: Injection Molded HPX® high performance resin
FOAM: 1.6pcf polyester
LATCH: Valox – PBT polybutylene terephthalate
PURGE BODY: Valox – PBT polybutylene terephthalate
LID O-RING: Silicone Sponge
PURGE VENT: Gortex membrane
PINS: Stainless Steel or Aluminum
PURGE O-RING: Buna-N , 50-60 Durometer Shore A
iM2750 Storm Case with Padded Dividers and Utility Organizer – Yellow
- Four Press & Pull Latches
- Three Double-layered, Soft-grip Handles
- Two Padlockable Hasps
- In-line Wheels
- Telescoping Handle
- Vortex® Valve
- Flush Powerful Hinges
- Lightweight Strong HPX® Resin
- Watertight
- Guaranteed For Life
INTERIOR (L x W x D)
22″ x 17″ x 12.7″ (55.9 x 43.2 x 32.2 cm)
EXTERIOR (L x W x D)
24.6″ x 19.7″ x 14.4″ (62.5 x 50 x 36.6 cm)
BODY: Injection Molded HPX® high performance resin
FOAM: 1.6pcf polyester
LATCH: Valox – PBT polybutylene terephthalate
PURGE BODY: Valox – PBT polybutylene terephthalate
LID O-RING: Silicone Sponge
PURGE VENT: Gortex membrane
PINS: Stainless Steel or Aluminum
PURGE O-RING: Buna-N , 50-60 Durometer Shore A
