Rodenstock eShutter 250 HR Digaron-S/W 5.6/90mm
$10,533.99
Out of stock
| Weight | 25 lbs |
|---|
Related Products
SINGLE ACTION
The Single Action kit is a tripod only kit with a follow focus unit but can easily be upgraded to a shoulder mounted rig. The Single Action includes all black rods. This kit works on any DSLR camera with or without battery grips as it is highly adjustable in height. The baseplate attaches to your tripod plate using the standard tripod plate screws, (2) ¼ 20 and (1) 3/8 16. Your camera can also be quickly released from the rig by turning the red knob then pulling up on your camera. The camera quick release plate stays mounted to your camera so you can quickly switch between using the camera as part of a rig or on its own. You can easily add the optional Z-Finder Pro by attaching the Z-Finder Mounting Frame (included with the Z-Finder Pro) to the camera quick release plate using two thumb screws.
The .8 pitch Zipgear Universal fits one lens by cutting the strand to fit your lens and connecting the strand together by using the included housing and allen key. The follow focus slides on the rods and the follow focus gear makes contact with the Zipgear allowing you to pull focus. If you require the use of other lenses with the follow focus, you must purchase additional ZipGears for each lens.
Kit Includes:
DSLR baseplate
Pair of Black 3.5 M/F Rods
Z-Focus
(2) Zipgear Universals
CROSS FIRE
The Cross Fire is a unique kit as it is the Single Action kit and Striker kit combined. It comes with all block rods. The Cross Fire uses the expandable DSLR baseplate so this kit can easily be upgraded from a simple point of contact kit like the Striker Kit to a full shoulder mounted system like the Fast Draw. This kit works on any DSLR camera with or without battery grips as it is infinitely adjustable in height. The baseplate attaches to your tripod plate using the standard tripod plate screws, (2) ¼ 20 and (1) 3/8 16. Your camera can also be quickly released from the rig by turning the red knob then pulling up on your camera. The camera quick release plate stays mounted to your camera so you can quickly switch between using the camera as part of a rig or on its own. You can easily add the optional Z-Finder Pro, DSLR optical viewfinder, by attaching the Z-Finder Mounting Frame (included with the Z-Finder Pro) to the camera quick release plate using two thumb screws.
