| Weight | 25 lbs |
|---|
Related Products
0550 Transport Case – Black (OVERSIZE)
- OVER 11 CUBIC FEET OF STORAGE SPACE
- FIT SIX 0550 CASES PER 463L MILITARY PALLET, 18 WHEN STACKED!
- Four extra-deep base-to-lid locking cleats ensure maximum stacking stability
- Optional Pallet Riser Kit
- Optional Caster Wheel Kit complete with brakes
- Easy open Double Throw latches
- Open cell core with solid wall design – strong, light weight
- Reinforced honeycomb deck and lid for added strength
- O-ring seal for dust and water resistant seal (IP55)
- Dual Integrated Automatic Pressure Equalization Valves
- Double wide grip fold down handles – makes lifting easy
- Lifetime Guarantee of Excellence
- Stainless steel hardware and padlock protectors
- Locking metal Lidstays keep lid locked in open position
- Store documents outside the case with our Document Container
- BUILT TO MOVE: BY FORKLIFT, BY WHEEL OR BY HAND
With over 11 cubic feet of space, you can store, protect, and move large loads in seconds. The reinforced honeycomb deck and lid construction provide support for heavy equipment, or multiple stacking on a 463L pallet. Opening the case at any altitude is not a problem- the dual integrated automatic pressure equalization valves keep moisture out and prevent vacuum lock, and the double wide grip makes lifting easy. With an IP55 certification, the 0550 Transport Case will protect your gear against rain and dirt. The 0550 Transport Case: Built to move-by forklift, by wheel, by hand.
INTERIOR (L x W x D)
47.57″ x 24.07″ x 17.68″ (120.8 x 61.1 x 44.9 cm)
EXTERIOR (L x W x D)
51.05″ x 27.54″ x 22.79″ (129.6 x 69.9 x 57.9 cm)
BODY: Polypropylene
LATCH: ABS
PURGE BODY: ABS
LID O-RING: Polymer
PURGE VENT: 3 Micron Hydrophobic Non-Woven PET
PINS: Stainless Steel
PURGE O-RING: 70 Shore Nitrile
iM3075 Storm Case with Foam – Black
Playstation 2 and accessories not included.
- Seven Press & Pull Latches
- Four Double-layered, Soft-grip Handles
- Two Padlockable Hasps
- In-line Wheels
- Telescoping Handle
- Vortex® Valve
- Flush Powerful Hinges
- Lightweight Strong HPX® Resin
- Watertight
- Guaranteed For Life
INTERIOR (L x W x D)
29.8″ x 20.8″ x 17.8″ (75.7 x 52.8 x 45.2 cm)
EXTERIOR (L x W x D)
33.3″ x 24.4″ x 19.3″ (84.5 x 62 x 49 cm)
BODY: Injection Molded HPX® high performance resin
FOAM: 1.6pcf polyester
LATCH: Valox – PBT polybutylene terephthalate
PURGE BODY: Valox – PBT polybutylene terephthalate
LID O-RING: Silicone Sponge
PURGE VENT: Gortex membrane
PINS: Stainless Steel or Aluminum
PURGE O-RING: Buna-N , 50-60 Durometer Shore A
1650 CASE Black with yellow/black padded dividers 016500-0040-110
Pelican 1650 WATERPROOF CASE Black with yellow/black padded dividers
- Unbreakable, Watertight, Hard Case
- Ultra-high Impact Structural Copolymer
- Padded Tub with Dividers Included
- Built-in Automatic Purge Valve
- Watertight to 30′
- Oversized Folding Handle
- Top Handle
- Retractable Extension Handle
- Built-in Wheels
- The black Pelican 1654 Waterproof 1650 Case with Yellow and Black Divider Set
is an unbreakable, watertight, airtight, dustproof, chemical resistant
and corrosion proof hard case used to carry any kind of equipment that
needs to be protected from the elements. It is made of Ultra-high Impact
structural copolymer that makes it extremely strong and durable. It has
a 0.25″ (6.4 mm) neoprene O-ring, ABS latches that seal perfectly and
includes an automatic purge valve for quick equalization after changes
in atmospheric pressure.
-
The 1654 comes with a top handle,
oversized side handle, a retractable extension handle and strong
polyurethane wheels with stainless steel bearings. It has an effortless
release latch for the extension handle. The padlock protectors provide
added strength and extra security against cutting and theft.
A
divider kit with a full sewn tub with felt exterior, and a padded,
touch-fastening, divider set is included. Elastic hold-down straps help
secure gear. The dividers feature a hi-visibility yellow Nylex covering.
- Construction
-
- Ultra-high Impact structural copolymer
- Watertight, crushproof, and dust proof
- Open-cell core with solid wall design
- 24-piece divider set interior
- Easy open double throw latches
- Stainless steel padlock protectors
- O-ring seal
- Automatic pressure equalization valve
- Stainless steel hardware
- Temperature rating -10 to +210°F (-23 to +99°C)
24-piece
padded divider set consisting of; 1 tray, 1 long (16.5″), 2 (10.5″), 2
(9.75″), 9 (5.0″), 8 (3.5″) padded and flexible dividers and 1
convoluted lid foam section
1637 Air Case with Padded Dividers – Black 016370-0040-110
INTERIOR (L X W X D)
23.43″ x 17.55″ x 13.25″ (59.5 x 44.6 x 33.7 cm)
EXTERIOR (L X W X D)
26.61″ x 20.65″ x 14.87″ (67.6 x 52.5 x 37.8 cm)
LID DEPTH: 2.00″ (5.1 cm)
BOTTOM DEPTH: 11.20″ (28.4 cm)
TOTAL DEPTH: 13.2″ (33.5 cm)
INT VOLUME: 3.15 ft³ (0.089 m³)
WEIGHT WITH FOAM: 19.40 lbs (8.8 kg)
WEIGHT WITHOUT FOAM: 15.20 lbs (6.9 kg)
BUOYANCY: 209.00 lbs (94.8 kg)
BODY: Proprietary Polypropylene Blend
LATCH: ABS
O-RING: EPDM
PURGE BODY: ABS
PURGE VENT: Hi-Flow Gore-Tex 3 Micron Hydrophobic Non-Woven
MINIMUM TEMPERATURE: -60° F (-51 ° C)
MAXIMUM TEMPERATURE: 160° F (71 ° C)
WHEELS: 2
RC 80QW ELITE WHEELED COOLER OD/TAN
80QT ELITE WHEELED COOLER – TAN
Pelican™ is proud to announce our bear resistant certification from the Interagency Grizzly Bear Committee.
The purpose of this certification is to help keep bears safe and significantly reduce bear-human encounters by ensuring that bears do not have access and become conditioned to anthropogenic foods and other bear attractants that increase these encounters.
This certification involves intense impact and penetration testing by use of visual inspection, mechanical methods and captive Grizzly Bear testing over extended periods of time.
Information relative to the IGBC testing and certification program can be viewed at www.IGBConline.org.
**Pelican™ Elite Coolers are certified bear-resistant by the IGBC under certification numbers 3365, 3366, 3373, 3374, 3375, 3376
- Up to 10 days ice retention, freezer grade gasket, 2″ polyurethane insulation
- Press & Pull Latches (Wide for Gloved Use)
- Molded-In Tie Downs
- Non-Skid & Non-Marking Raised Feet
- Molded-In Lock Hasp, Stainless Steel Plate
- Sloped Drain & Tethered Threaded Plug (Garden Hose Attachable)
- Corrosion Resistant Stainless Steel Hardware
- Integrated Fish Scale on Lid
- Made in USA
- Heavy duty wheels
- Molded-In handles with built in trolley handle
- Guaranteed for life
- Built-in Bottle Opener
- Built-in trolley handle with molded-in handles
