Related Products
iM2975 Storm Case with Padded Dividers – Yellow
Image displays orange case but actual color of product will be as listed.
- Five Press & Pull Latches
- Three Double-layered, Soft-grip Handles
- Two Padlockable Hasps
- In-line Wheels
- Telescoping Handle
- Vortex® Valve
- Flush Powerful Hinges
- Lightweight Strong HPX® Resin
- Watertight
- Guaranteed For Life
INTERIOR (L x W x D)
29″ x 18″ x 13.8″ (73.6 x 45.7 x 35 cm)
EXTERIOR (L x W x D)
31.3″ x 20.4″ x 15.5″ (79.5 x 51.8 x 39.4 cm)
BODY: Injection Molded HPX® high performance resin
FOAM: 1.6pcf polyester
LATCH: Valox – PBT polybutylene terephthalate
PURGE BODY: Valox – PBT polybutylene terephthalate
LID O-RING: Silicone Sponge
PURGE VENT: Gortex membrane
PINS: Stainless Steel or Aluminum
PURGE O-RING: Buna-N , 50-60 Durometer Shore A
1650 Case with Trek Pak Divider System 016500-0050-110
- RETRACTABLE EXTENSION HANDLE
- 4 STRONG POLYURETHANE WHEELS WITH STAINLESS STEEL BEARINGS
- Easy open Double Throw latches
- Open cell core with solid wall design – strong, light weight
- O-ring seal
- Automatic Pressure Equalization Valve
- Fold down handles
- Stainless steel hardware and padlock protectors
- 2 level Pick N Pluck™ with convoluted lid foam
- Lifetime Guarantee of Excellence
- WATERTIGHT, CRUSHPROOF, AND DUSTPROOF
INTERIOR (L x W x D)
28.57″ X 17.52″ X 10.65″ (72.5 X 44.5 X 27 CM)
EXTERIOR (L x W x D)
31.59″ X 20.47″ X 12.45″ (80.2 X 52 X 31.6 CM)
BODY: POLYPROPYLENE
FOAM: 1.3 LB POLYURETHANE
LATCH: ABS
PURGE BODY: ABS
LID O-RING: POLYMER
PURGE VENT: 3 MICRON HYDROPHOBIC NON-WOVEN PET
PINS: STAINLESS STEEL
PURGE O-RING: 70 SHORE NITRILE
The Ultimate Divider System for the Ultimate Case.
CLEAN AND STRONG
The TrekPak™ system uses pre-installed wall sections, divider panels, locking pins and a fool-proof cutting tool. Just lay your gear in the case, measure and cut the divider sections and lock them in place with the steel U-pins. We include extra divider material so you can change your mind, plus divider panels are also available separately so you can reconfigure your dividers anytime.
The results are impressive. The divider sections are manufactured from waterproof, closed cell foam that is laminated to a rigid corrugated
plastic panel. Light, strong and almost impossible to tear or shred, these panels will keep your gear safe for years.
THE CUTTING EDGE
Trimming the dividers to length is a snap. TrekPak’s exclusive double blade tool has a center guide that tracks in the corrugated center. Just place the tool in any hole and pull. The blades follow the slot for a perfectly straight cut every time.
THE NEW SPACE RACE
You’ll be amazed at how much more gear you can get into your new case. At just 7/16” thick, these rigid panels form a precise grid of protection without wasting any space.
Together with the included 1” bottom foam and convoluted lid foam, the TrekPak™ system forms a 360-degree cocoon inside your Pelican case
iM2750 Storm Case with Padded Dividers and Utility Organizer – Black
- Four Press & Pull Latches
- Three Double-layered, Soft-grip Handles
- Two Padlockable Hasps
- In-line Wheels
- Telescoping Handle
- Vortex® Valve
- Flush Powerful Hinges
- Lightweight Strong HPX® Resin
- Watertight
- Guaranteed For Life
INTERIOR (L x W x D)
22″ x 17″ x 12.7″ (55.9 x 43.2 x 32.2 cm)
EXTERIOR (L x W x D)
24.6″ x 19.7″ x 14.4″ (62.5 x 50 x 36.6 cm)
BODY: Injection Molded HPX® high performance resin
FOAM: 1.6pcf polyester
LATCH: Valox – PBT polybutylene terephthalate
PURGE BODY: Valox – PBT polybutylene terephthalate
LID O-RING: Silicone Sponge
PURGE VENT: Gortex membrane
PINS: Stainless Steel or Aluminum
PURGE O-RING: Buna-N , 50-60 Durometer Shore A
iM2975 Storm Case with Padded Dividers – Gray
Image displays black case but actual color of product will be as listed.
- Five Press & Pull Latches
- Three Double-layered, Soft-grip Handles
- Two Padlockable Hasps
- In-line Wheels
- Telescoping Handle
- Vortex® Valve
- Flush Powerful Hinges
- Lightweight Strong HPX® Resin
- Watertight
- Guaranteed For Life
INTERIOR (L x W x D)
29″ x 18″ x 13.8″ (73.6 x 45.7 x 35 cm)
EXTERIOR (L x W x D)
31.3″ x 20.4″ x 15.5″ (79.5 x 51.8 x 39.4 cm)
BODY: Injection Molded HPX® high performance resin
FOAM: 1.6pcf polyester
LATCH: Valox – PBT polybutylene terephthalate
PURGE BODY: Valox – PBT polybutylene terephthalate
LID O-RING: Silicone Sponge
PURGE VENT: Gortex membrane
PINS: Stainless Steel or Aluminum
PURGE O-RING: Buna-N , 50-60 Durometer Shore A
iM3075 Storm Case with Utility Organizer – Olive Drab
- Seven Press & Pull Latches
- Four Double-layered, Soft-grip Handles
- Two Padlockable Hasps
- In-line Wheels
- Telescoping Handle
- Vortex® Valve
- Flush Powerful Hinges
- Lightweight Strong HPX® Resin
- Watertight
- Guaranteed For Life
INTERIOR (L x W x D)
29.8″ x 20.8″ x 17.8″ (75.7 x 52.8 x 45.2 cm)
EXTERIOR (L x W x D)
33.3″ x 24.4″ x 19.3″ (84.5 x 62 x 49 cm)
BODY: Injection Molded HPX® high performance resin
FOAM: 1.6pcf polyester
LATCH: Valox – PBT polybutylene terephthalate
PURGE BODY: Valox – PBT polybutylene terephthalate
LID O-RING: Silicone Sponge
PURGE VENT: Gortex membrane
PINS: Stainless Steel or Aluminum
PURGE O-RING: Buna-N , 50-60 Durometer Shore A
