
Style P50 Mount & Print Shipping Case 11x14x1
These ruggedly built cases are specially made for transporting and storing your valuable mounted matted prints pictures artwork. Made of virtually indestructible polypropylene these cases feature tough nylon web straps with quick release buckles contour
$159.99
In stock
Related Products

$4,703.99Add to cart
670 VCCE Dichroic Auto Variable Contrast
Dichroic Enlarger for All Popular B&W Variable Contrast PapersThe specially designed VCCE system incorporates a unique, dual-range design that provides two separate filtration channels covering all popular variable contrast papers. As filtration is changed, the enlarger automatically introduces the correct amount of neutral density to maintain constant exposure throughout the range of paper grades. This is achieved with state-of-the-art, dichroic cut-off filters which selectively pass certain wavelengths while rejecting others, resulting in a spectrally pure beam of light. The 670VCCE features the same chassis and baseboard as the popular Saunders/LPL 670MXL dichroic and 670CXL triple-condenser enlargers. What's more, the 670VCCE can be purchased as a complete enlarger or lamphouse only, for use on an existing 670-series chassis. Lamphouses are completely interchangeable, without tools. Simply Dial In Filtration – The Enlarger Compensates to Maintain Constant Exposure!The heart of the 670VCCE is its revolutionary lamphouse. Two independent filtration channels allow use of all popular contrast papers: Channel “1” is calibrated for Kodak Polycontrast III, Kodak Polymax and other equivalent variable contrast papers.Channel “2” is calibrated for use with Ilford Multigrade III RC papers, or compatible papers such as Agfa and Oriental.A convenient slide-switch makes channel selection quick and easy. Once the appropriate channel has been chosen, you simply dial in the desired paper grade. Paper grade readout displays are illuminated, stepless and marked in half-grade increments: Channel one displays filtration settings from -1 to 6, Channel Two displays filtration settings from 00 to 5. The unused channel readout is automatically masked to prevent the possibility of error.
$4,703.99Add to cart

$1,914.95Add to cart
TRP The Sink II, Black, 48″ x 33″ x 13″, (UPS/OS) (OVERSIZE)
State of the art, fully assembled, plumbed, and lab tested temperature regulated sink package. +/- 1/2 degree F 1-7 GPM, vacuum breaker, 4′ armored spray hose, ball valve shut-off. dual scale 3″ thermometer, stainless steel brackets, two valve tempered outlets, 100% chrome brass fittings, 1000 lb. test tubing. Features + 1/2 degree F 1-7 GPM Check stop valves Vacuum breaker 4′ armored spray hose with tempered water source and ball valve shut off Dual scale 3″ thermometer with recalibration screw Includes maintenance log & thermostatic mixer manual Stainless steel brackets Two valve tempered water outlets with 3/4″ GHT fittings, one behind sink for processor hookup. 100% solid copper, chromed brass fittings & armored 1000 lb. test tubing
$1,914.95Add to cart

$23,127.99Add to cart
VACUUM PRESS 5298H
The Seal 5298H Vacuum Dry Mount Press is another leap forward for the Seal/Bienfang company. As the leading company for photo finishing and mounting, Seal has produced a dry mount press that also pre-dries your board, thereby saving time. This press can handle big jobs and handles multiple pieces at the same time.
Bienfang Vacuum Presses are designed to automatically control the four main variables of mounting: moisture, pressure temperature and time. This assures consistent results. There are two simple ways to operate the Vacuum Press: by setting each control individually or by using convenient programmed settings. Some settings are preset at the factory but you can also set your own programs for procedures you conduct repeatedly.
Platen temperature is maintained at +/- 2° F of the set temperature. Manufacturer’s warranty covers on-site service only.
$23,127.99Add to cart

$2,700.00 $2,430.00Add to cart
SCORPRION
The Scorpion rig is the ultimate solution to DSLR shoulder mounted shooting with an EVF. At the center of the Scorpion is our highly adjustable DSLR Baseplate, which allows you to mount any DSLR to the rig and mount your rig onto a tripod. The baseplate attaches to your tripod using the standard tripod plate screws; (2) 1/4 20 and (1) 3/8 16. You can also easily quick release your camera from the rig by turning the red knob on the side of the baseplate and pulling up on your camera. This unique feature allows you to quickly switch between using the camera on its own or as part of your rig.
Our new curved form-fitting silicone gel shoulder pad connects to the back of the baseplate via two 2 M/F rods. The rods screw into the back of the DSLR baseplate and connect to the front of the shoulder pad via 15mm quick release ports, making the switch from shoulder mount to tripod use quick and easy. The Scorpion Shoulder Assembly also features an innovative ball joint built into the front of the shoulder pad. This allows the entire shoulder pad assembly to articulate in multiple directions so shooters can angle it to fit their body for individual comfort. This should be done with one hand while the kit is on your shoulder. The ball joint is released and secured by the red top lever.
The Scorpion can be used on your left or right shoulder. The Scorpion shoulder assembly also has a built in top handle for placing and removing it from your shoulder, low mode shooting and easy carrying. The handle can be positioned up or set down into the shoulder pad for storage with the turn of a Zacuto quick release lever.
The Scorpion kit is finished off with a 7lb Z-lite counterbalance and Zgrips V3 with 4.5 rods. With the shoulder pad and counterbalance weight coming directly off of the back of the baseplate, the rig is perfectly in-line with the camera and ready to be used with one of our EVFs or an on-board monitor for traditional ENG style shooting. You can mount your EVF or monitor to the side of the rig using the included EVF mount.
Scorpion Includes:
-DSLR Baseplate with (2) sets of 3.5″ M/F Rods
-Scorpion Shoulder Assembly
-Zgrips V3 with 4.5″ Rods
-Z-Lite Double
-EVF Scorpion Mount
$2,700.00 $2,430.00Add to cart

$2,196.95Add to cart
TRP The Sink II 72″x32″x13″, Black – OVERSIZE (OVERSIZE)
**OVERSIZE**
State-of-the-Art, fully assembled, plumbed, and lab tested. One Year LTD Warranty on Water Controls. plus or minus1/2 degree G, 1-7 GPM Mixer. Check stop valves. Vacuum breaker. Dual scale 3″ thermometer with recalibration screw. 4 Ft. armored spray hose. Includes Thermostatic mixer manual. Stainless steel brackets. Three valves tempered and one untempered water outlets with 3/4″ GHT fittings. 100% plated brass fittings and stainless steel armored 1000 lb. test tubing. 72″ x 32″ x 13″
$2,196.95Add to cart