TSA Peli Lock fits any Pelican Case
The Pelican 1506TSA Lock is a 3 digit combination lock that is TSA approved. This allows the checked luggage to remain protected, because the TSA baggage screeners have special codes and tools which will unlock it. They relock the bag after inspection. While designed for Pelican cases, this lock obviously will work with many other cases. It has a stainless steel hasp that does not corrode.
- Three digit combination lock
- TSA (Transport Security Administration) approved
- Works with TSA Pass Key for worry free travel
- Stainless steel hasp that does not corrode
- Compatible with all Pelican cases
$21.00
In stock
| Weight | 0.33 lbs |
|---|
Related Products
iM2975 Storm Case with Padded Dividers – Gray
Image displays black case but actual color of product will be as listed.
- Five Press & Pull Latches
- Three Double-layered, Soft-grip Handles
- Two Padlockable Hasps
- In-line Wheels
- Telescoping Handle
- Vortex® Valve
- Flush Powerful Hinges
- Lightweight Strong HPX® Resin
- Watertight
- Guaranteed For Life
INTERIOR (L x W x D)
29″ x 18″ x 13.8″ (73.6 x 45.7 x 35 cm)
EXTERIOR (L x W x D)
31.3″ x 20.4″ x 15.5″ (79.5 x 51.8 x 39.4 cm)
BODY: Injection Molded HPX® high performance resin
FOAM: 1.6pcf polyester
LATCH: Valox – PBT polybutylene terephthalate
PURGE BODY: Valox – PBT polybutylene terephthalate
LID O-RING: Silicone Sponge
PURGE VENT: Gortex membrane
PINS: Stainless Steel or Aluminum
PURGE O-RING: Buna-N , 50-60 Durometer Shore A
0550 Transport Case – Black (OVERSIZE)
- OVER 11 CUBIC FEET OF STORAGE SPACE
- FIT SIX 0550 CASES PER 463L MILITARY PALLET, 18 WHEN STACKED!
- Four extra-deep base-to-lid locking cleats ensure maximum stacking stability
- Optional Pallet Riser Kit
- Optional Caster Wheel Kit complete with brakes
- Easy open Double Throw latches
- Open cell core with solid wall design – strong, light weight
- Reinforced honeycomb deck and lid for added strength
- O-ring seal for dust and water resistant seal (IP55)
- Dual Integrated Automatic Pressure Equalization Valves
- Double wide grip fold down handles – makes lifting easy
- Lifetime Guarantee of Excellence
- Stainless steel hardware and padlock protectors
- Locking metal Lidstays keep lid locked in open position
- Store documents outside the case with our Document Container
- BUILT TO MOVE: BY FORKLIFT, BY WHEEL OR BY HAND
With over 11 cubic feet of space, you can store, protect, and move large loads in seconds. The reinforced honeycomb deck and lid construction provide support for heavy equipment, or multiple stacking on a 463L pallet. Opening the case at any altitude is not a problem- the dual integrated automatic pressure equalization valves keep moisture out and prevent vacuum lock, and the double wide grip makes lifting easy. With an IP55 certification, the 0550 Transport Case will protect your gear against rain and dirt. The 0550 Transport Case: Built to move-by forklift, by wheel, by hand.
INTERIOR (L x W x D)
47.57″ x 24.07″ x 17.68″ (120.8 x 61.1 x 44.9 cm)
EXTERIOR (L x W x D)
51.05″ x 27.54″ x 22.79″ (129.6 x 69.9 x 57.9 cm)
BODY: Polypropylene
LATCH: ABS
PURGE BODY: ABS
LID O-RING: Polymer
PURGE VENT: 3 Micron Hydrophobic Non-Woven PET
PINS: Stainless Steel
PURGE O-RING: 70 Shore Nitrile
iM3075 Storm Case with Foam – Black
Playstation 2 and accessories not included.
- Seven Press & Pull Latches
- Four Double-layered, Soft-grip Handles
- Two Padlockable Hasps
- In-line Wheels
- Telescoping Handle
- Vortex® Valve
- Flush Powerful Hinges
- Lightweight Strong HPX® Resin
- Watertight
- Guaranteed For Life
INTERIOR (L x W x D)
29.8″ x 20.8″ x 17.8″ (75.7 x 52.8 x 45.2 cm)
EXTERIOR (L x W x D)
33.3″ x 24.4″ x 19.3″ (84.5 x 62 x 49 cm)
BODY: Injection Molded HPX® high performance resin
FOAM: 1.6pcf polyester
LATCH: Valox – PBT polybutylene terephthalate
PURGE BODY: Valox – PBT polybutylene terephthalate
LID O-RING: Silicone Sponge
PURGE VENT: Gortex membrane
PINS: Stainless Steel or Aluminum
PURGE O-RING: Buna-N , 50-60 Durometer Shore A
iM2750 Storm Case with Padded Dividers and Utility Organizer – Black
- Four Press & Pull Latches
- Three Double-layered, Soft-grip Handles
- Two Padlockable Hasps
- In-line Wheels
- Telescoping Handle
- Vortex® Valve
- Flush Powerful Hinges
- Lightweight Strong HPX® Resin
- Watertight
- Guaranteed For Life
INTERIOR (L x W x D)
22″ x 17″ x 12.7″ (55.9 x 43.2 x 32.2 cm)
EXTERIOR (L x W x D)
24.6″ x 19.7″ x 14.4″ (62.5 x 50 x 36.6 cm)
BODY: Injection Molded HPX® high performance resin
FOAM: 1.6pcf polyester
LATCH: Valox – PBT polybutylene terephthalate
PURGE BODY: Valox – PBT polybutylene terephthalate
LID O-RING: Silicone Sponge
PURGE VENT: Gortex membrane
PINS: Stainless Steel or Aluminum
PURGE O-RING: Buna-N , 50-60 Durometer Shore A
