- Produces a large blast of clean air
- Nozzle can tilt up to 60 degrees
- Instant rebound of bulb pressure
- One way valve brings clean air and does not re-distribute the dust
- Stands upright
- 5.5-Inch long
- 2.0-Inch long nozzle
- 2.6-Inch in Leg diameter
- Nozzle tilts 60 degrees
|Dimensions||8 × 4 × 3 in|
EZ Plus Kit- 1.15 ml Sensor Clean + 5 Swabs 1.3 with sensor brush
EZ Plus Kit- 1.15 ml Sensor Clean + 5 Swabs 1.6 with sensor brush
Arctic Beez™ is a pulsating device (patent pending) with a frequency of 13000 rpm and a unique buzzing sound similar to that of bees. This vibration frequency is carried to the swab which is placed inside the device cavity. The Swabsonic™ Technology is powered by a DC engine and smart electronic circuitry that generates soft sonic vibration to loosen dirt and stain on the coated sensor. It works 4X more efficiently than when the swab is used alone. One major cost associated with regular sensor cleaning is the number of swabs used per cleaning session in order to remove the stubborn stain. Arctic Beez™ helps to reduce the number of swabs used in sticky dirt situations leading to essential cost saving. These savings can accumulate over the years and may even be significant enough to pay for a newer camera body!
Arctic Beez™ is equipped with one bright LED light illuminating the entire sensor and acting as a Swablight™. Arctic Beez™ supports a firm grip on the swab helping to achieve a better and more precise edge to edge sensor cleaning. Arctic Beez™ Smart Vibration Technology is designed to push the dirt in a forward motion and not laterally and yet to be safe on DSLR coated sensors.
Arctic Beez™ essential features includes:
• Swabsonic™ Technology powered by DC engine and smart circuitry.
• Safe on coated sensor.
• Equipped with Bright LED light.
• 4X more efficient verses sensor cleaning alone.
• Strong grip for precise edge to edge sensor cleaning.
• Packed in a classy case.
*Requires 2 AAA batteries (not included)* Swabs are not included
Not recommended for cameras with IS (image stabilization) on the Sensor.
The baLens is a snap-on lens cap with a removable translucent dome in the center. By simply placing the cap on your lens, pointing the camera at the light source and doing a manual white balance, superior color correction is easily achieved under any lighting conditions. Simple. Smart. Functional. Change the way your camera sees color. Go from orange, blue and green-tinted photos to beautifully captured color by setting a custom white balance with the baLens Cap. The patent-pending baLens White Balance Lens Cap system comes with interchangeable neutral and warm filters. So no matter how challenging the lighting, with a baLens Cap you can get better colors right out of the bag. Save time, energy and money by eliminating the need to adjust an image’s color balance in your photo editing software. baLens allows you to concentrate on the creative aspects of your photography. The baLens is simple to use: mount the baLens Lens Cap on the lens, take a reference exposure of the light falling on your intended subject with the camera set in manual focus/auto exposure mode. The baLens Lens Cap will allow the setting of a custom white balance based on the actual color temperature of the light source. The dome-shaped filter allows for very accurate measurement of color temperature under mixed light source conditions. Using the camera’s menu functions, locate the custom white balance setting and apply the reading. A warm dome is included for when you wish to achieve natural skin tones in portraits or an overall warmer effect in your photos. BRNO implements very strict quality controls. For example, once the formula for the center filter pieces are mixed, a pre-production sample is taken and measured against a control sample on a photo spectrometer and densitometer. Once this is approved, then samples are taken from production pieces during various times during output and retested, providing you a product that meets the highest of standards.
Puffer™Plus for Sony/Konica Minolta utilizes a new, larger shield with an advanced, light-filtering textured finish and a convenient sliding rail system that allows for quick centering of the shield over the camera’s pop-up flash, greatly softening the quality of light. Flash diffuser for Sony/Konica Minolta brand cameras.
Be sure to check out the optional Warming Shield!